https://community.hpe.com/t5/insight-remote-support/osem-does-not-recognize-client/m-p/3887372#M920 This likely means that OSEM is not able to perform an SNMP GET from that system. <BR /><BR />First of all check that the SNMP settings are correct.<BR /><BR />If that doesn't solve the issue i advise you to upgrade to OSEM 1.4.1. Some of these issues should be fixed here.<BR /><BR /> Fri, 03 Nov 2006 04:13:15 GMT A. van Berk 2006-11-03T04:13:15Z https://community.hpe.com/t5/insight-remote-support/osem-does-not-recognize-client/m-p/3887371#M919 I used centralized OSEM server to recieve snmp trap from proliant servers. I submitted a test trap from one client. In "notification" page on OSEM, it appeared " configuration" instead of "delivered" for the delivery status. It complained that server "unknown" to OSEM. But OSEM has already had this server included in the managed system list.<BR />Anybody can help troubleshooting this?<BR />Thanks<BR />Alex Thu, 26 Oct 2006 10:33:30 GMT https://community.hpe.com/t5/insight-remote-support/osem-does-not-recognize-client/m-p/3887371#M919 AlexZhang 2006-10-26T10:33:30Z https://community.hpe.com/t5/insight-remote-support/osem-does-not-recognize-client/m-p/3887372#M920 This likely means that OSEM is not able to perform an SNMP GET from that system. <BR /><BR />First of all check that the SNMP settings are correct.<BR /><BR />If that doesn't solve the issue i advise you to upgrade to OSEM 1.4.1. Some of these issues should be fixed here.<BR /><BR /> Fri, 03 Nov 2006 04:13:15 GMT https://community.hpe.com/t5/insight-remote-support/osem-does-not-recognize-client/m-p/3887372#M920 A. van Berk 2006-11-03T04:13:15Z