https://community.hpe.com/t5/insight-remote-support/mad-u-root/m-p/3904898#M944 Hi<BR />I was making my daily checklist and found this command increasing the CPU utilization on my server: mad -u root<BR />I had never seen it before, so I need to know what is it used for.<BR />Can anybody help me?<BR />Thanks Tue, 28 Nov 2006 12:02:52 GMT Ana María 2006-11-28T12:02:52Z https://community.hpe.com/t5/insight-remote-support/mad-u-root/m-p/3904898#M944 Hi<BR />I was making my daily checklist and found this command increasing the CPU utilization on my server: mad -u root<BR />I had never seen it before, so I need to know what is it used for.<BR />Can anybody help me?<BR />Thanks Tue, 28 Nov 2006 12:02:52 GMT https://community.hpe.com/t5/insight-remote-support/mad-u-root/m-p/3904898#M944 Ana María 2006-11-28T12:02:52Z https://community.hpe.com/t5/insight-remote-support/mad-u-root/m-p/3904899#M945 Hello,<BR />the process "mad" is the main process of ISEE. It should not consume to much cpu time - if it does, ether it logs and transmitts events or there is a problem. Therefor please check, wether several new incidents have been created, if not, please restart the hpservices (/sbin/init.d/hpservices stop // start). With one of the old versions there was a problem with the mad that occured very rarely - therefor, if the problem occurs again, update to the latest version (would be a good idea anyway - just install the new version, it will keep the configuration).<BR />Regards<BR />Frauke Wed, 29 Nov 2006 05:24:35 GMT https://community.hpe.com/t5/insight-remote-support/mad-u-root/m-p/3904899#M945 Frauke Denker_2 2006-11-29T05:24:35Z