https://community.hpe.com/t5/server-management-systems/http-is-disable-on-the-target-server/m-p/3496240#M10372 I tried to upgrade the firmware on a Ilo card through SIM. This is message I got. I don't know why I am getting this message, since I am able to Http into the blade server. Wed, 02 Mar 2005 13:01:13 GMT David cheng_3 2005-03-02T13:01:13Z https://community.hpe.com/t5/server-management-systems/http-is-disable-on-the-target-server/m-p/3496240#M10372 I tried to upgrade the firmware on a Ilo card through SIM. This is message I got. I don't know why I am getting this message, since I am able to Http into the blade server. Wed, 02 Mar 2005 13:01:13 GMT https://community.hpe.com/t5/server-management-systems/http-is-disable-on-the-target-server/m-p/3496240#M10372 David cheng_3 2005-03-02T13:01:13Z https://community.hpe.com/t5/server-management-systems/http-is-disable-on-the-target-server/m-p/3496241#M10373 What method are you using? Wed, 02 Mar 2005 14:00:14 GMT https://community.hpe.com/t5/server-management-systems/http-is-disable-on-the-target-server/m-p/3496241#M10373 David Claypool 2005-03-02T14:00:14Z https://community.hpe.com/t5/server-management-systems/http-is-disable-on-the-target-server/m-p/3496242#M10374 I used sim under deploy - deploy driver, firmware and agent - install software and firmware then I picked the target server and new firmware to deploy to the target server. Wed, 02 Mar 2005 14:10:47 GMT https://community.hpe.com/t5/server-management-systems/http-is-disable-on-the-target-server/m-p/3496242#M10374 David cheng_3 2005-03-02T14:10:47Z