https://community.hpe.com/t5/server-management-systems/replicate-agent-settings-task-doesn-t-work-for-thresholds/m-p/3501889#M10592 Hi,<BR /><BR />When I create the Replicate agent settings task, I have to select a source. The settings from the source are shown, except for the thresholds: I can see the parameters in the settings tree, but the values are empty, even after clicking "Last update". First I thought the settings were loaded, but now shown in the tree, but tests have proven that thresholds can't be replicated through this task...<BR /><BR />I have to say that I only have this problem with 7.20 sources. Everything works perfect if I use a 7.10 source. Is there an explanation or solution...? Thanks!!<BR /><BR />Pedro<BR /> Thu, 10 Mar 2005 09:30:38 GMT Christophe Heereman 2005-03-10T09:30:38Z https://community.hpe.com/t5/server-management-systems/replicate-agent-settings-task-doesn-t-work-for-thresholds/m-p/3501889#M10592 Hi,<BR /><BR />When I create the Replicate agent settings task, I have to select a source. The settings from the source are shown, except for the thresholds: I can see the parameters in the settings tree, but the values are empty, even after clicking "Last update". First I thought the settings were loaded, but now shown in the tree, but tests have proven that thresholds can't be replicated through this task...<BR /><BR />I have to say that I only have this problem with 7.20 sources. Everything works perfect if I use a 7.10 source. Is there an explanation or solution...? Thanks!!<BR /><BR />Pedro<BR /> Thu, 10 Mar 2005 09:30:38 GMT https://community.hpe.com/t5/server-management-systems/replicate-agent-settings-task-doesn-t-work-for-thresholds/m-p/3501889#M10592 Christophe Heereman 2005-03-10T09:30:38Z