topic Re: upgrade firmware ILo problem in Server Management - Systems Insight Manager

upgrade firmware ILo problem

remy_4 — Mon, 04 Apr 2005 09:15:17 GMT

Hi
Configuration : 10 Blades BL30P in 1 enclosure
I have upgrade firmware of 8 ILo in 1.7 but 2 are now unreachable.
I can't ping them.
I don't know what's happen and the Led "Fault" of Management module is red.
someone can help me
Thanks

Re: upgrade firmware ILo problem

Mike Strako — Mon, 04 Apr 2005 14:06:02 GMT

If you can T/S into the blades, here are some sample scripts you can use to default the iLo's back to. Once the iLo's are defaulted or properly configured usually the management faults clear up.

Here's the link.
http://support.microsoft.com/default.aspx?scid=kb;en-us;327153

Re: upgrade firmware ILo problem

remy_4 — Tue, 05 Apr 2005 07:32:20 GMT

Hello
I don't understand the link between Ilo's firmware and microsoft.
Sorry

Re: upgrade firmware ILo problem

Mike Strako — Tue, 05 Apr 2005 08:46:18 GMT

I'm sorry, wrong link. Here is the correct one. :-)

http://h18023.www1.hp.com/support/files/server/us/download/22183.html

Re: upgrade firmware ILo problem

remy_4 — Tue, 05 Apr 2005 09:32:59 GMT

thanks for the link but I can't ping ILO and I can't connect to it.

Regards

Re: upgrade firmware ILo problem

Mike Strako — Tue, 05 Apr 2005 09:35:50 GMT

Are the servers configured, meaning an OS on it and Terminal services installed?

Re: upgrade firmware ILo problem

remy_4 — Wed, 06 Apr 2005 01:51:42 GMT

Yes, server (BL30P)is configured, o.s is Windows 2003 server.
Before upgrading ILo's firmware in 1.7 (old firmware was 1.62), all was OK.

Re: upgrade firmware ILo problem

Mike Strako — Wed, 06 Apr 2005 08:40:26 GMT

Good, then you can use the scripts to help configure your iLo's. You can set networking settings, users, names Etc. Let me know if you need more assistance.

Re: upgrade firmware ILo problem

remy_4 — Fri, 08 Apr 2005 03:10:37 GMT

Yesterday, HP has changed the management module et I reboot the enclosure
All is OK now :)

Thanks for yur help

Re: upgrade firmware ILo problem

Hochmuth_1 — Fri, 08 Apr 2005 05:22:13 GMT

I have the same Problems with our DL380G3 und DL360G3. Also Firmware 1.75 for ILO didn't solve the Problems. All ILO Components are shown at the Managementhomepage as "failed".

HP replaced the hole ILO-modules?