https://community.hpe.com/t5/server-management-systems/hp-insight-errpr/m-p/3519897#M11178 It's a warning, you generally cannot do anything about it.<BR />An application requires more memory, faults it in, thereby triggering the alarm and then often winds back down.<BR /><BR />The "fix" would be to configure tha Application so that it preallocates and holds the Memory as required.<BR />Some OSes allow a bit more control over this. Thu, 07 Apr 2005 15:35:29 GMT Rob Buxton 2005-04-07T15:35:29Z https://community.hpe.com/t5/server-management-systems/hp-insight-errpr/m-p/3519896#M11177 High average page read rate (below 5 is normal). However, there is still at least 20 MB of available memory. This can happen when a process is limited in the amount of memory it can allocate and results in high paging even though more memory is available. Thus this situation may look like a bottleneck when it is not.<BR /><BR />Please advise Thu, 07 Apr 2005 03:56:32 GMT https://community.hpe.com/t5/server-management-systems/hp-insight-errpr/m-p/3519896#M11177 Dave_430 2005-04-07T03:56:32Z https://community.hpe.com/t5/server-management-systems/hp-insight-errpr/m-p/3519897#M11178 It's a warning, you generally cannot do anything about it.<BR />An application requires more memory, faults it in, thereby triggering the alarm and then often winds back down.<BR /><BR />The "fix" would be to configure tha Application so that it preallocates and holds the Memory as required.<BR />Some OSes allow a bit more control over this. Thu, 07 Apr 2005 15:35:29 GMT https://community.hpe.com/t5/server-management-systems/hp-insight-errpr/m-p/3519897#M11178 Rob Buxton 2005-04-07T15:35:29Z