topic HP Web Agent HTTP Post Error after W2k3 SP1 in Server Management - Systems Insight Manager

HP Web Agent HTTP Post Error after W2k3 SP1

Alison_10 — Fri, 06 May 2005 14:43:45 GMT

After upgrading our Windows 2003 to SP1, we have error whenever we make a change:"HP Web Agent HTTP Post Error. An error occurred attempting a SNMP set request. Invalid type post request or parameter missing".

Anybody has this same problem?

Thanks.......................

Re: HP Web Agent HTTP Post Error after W2k3 SP1

Haridas — Fri, 06 May 2005 16:10:59 GMT

What change were you making ? When you do get this error? What version of PSP have you installed? What is the hardware?

Please provide these details?

Re: HP Web Agent HTTP Post Error after W2k3 SP1

Alison_10 — Fri, 06 May 2005 16:53:52 GMT

Hello,

I can't change in several locations: For example: I logged on to the Management Homepage->Recovery->Environment->Change Thermal Degraded Action to Shutdown or Continue

Nor can I change: Recovery->Remote Communication->Enable/Disable Dial in/Dial Out/Network Access.

It happened only for the servers with W2K3 SP1 installed. The rest are still good.

I use ML570 G2, SIM4.2 SP2

Thanks.............................

Re: HP Web Agent HTTP Post Error after W2k3 SP1

Haridas — Sat, 07 May 2005 19:37:26 GMT

This could be due to access rights of SNMP community strings. Open SNMP Services properties. Under security tab, check if the community string has "READ-WRITE" access. If not, change it to "READ-WRITE" access. Restart SNMP Service and Management Agents. Then try setting those options in Agents.

Re: HP Web Agent HTTP Post Error after W2k3 SP1

Frank Bender — Sun, 08 May 2005 04:51:29 GMT

Hi Alison,

there is an issue with SIM and W2K3 SP1:
http://support.microsoft.com/?kbid=896367

Have you installed the updates for SIM?

Regards
Frank