https://community.hpe.com/t5/server-management-systems/mxdomainmgr-exe-memory-issue/m-p/3552450#M12160 I noticed some comments on the board about this process taking up loads of memory. The only resolution appeared to be a hardware upgrade. Was a bug ever found as to why this service was taking so so much memory for so long? I have an HP DL380 G2 with dual 1.4Ghz processors and 2 GB of memory - this should be sufficient. Any suggestions? Thu, 26 May 2005 09:17:15 GMT Michael Wiederspiel 2005-05-26T09:17:15Z https://community.hpe.com/t5/server-management-systems/mxdomainmgr-exe-memory-issue/m-p/3552450#M12160 I noticed some comments on the board about this process taking up loads of memory. The only resolution appeared to be a hardware upgrade. Was a bug ever found as to why this service was taking so so much memory for so long? I have an HP DL380 G2 with dual 1.4Ghz processors and 2 GB of memory - this should be sufficient. Any suggestions? Thu, 26 May 2005 09:17:15 GMT https://community.hpe.com/t5/server-management-systems/mxdomainmgr-exe-memory-issue/m-p/3552450#M12160 Michael Wiederspiel 2005-05-26T09:17:15Z https://community.hpe.com/t5/server-management-systems/mxdomainmgr-exe-memory-issue/m-p/3552451#M12161 Minimum requirements fir SIM4.2 SP2<BR /> <BR />ProLiant servers<BR /><BR />1.5GHz Pentium II processor <BR /> <BR />256MB RAM with VCRM and MSDE on the same server<BR /><BR />1GB RAM with VCRM and SQL2000 on the same server<BR /><BR />2GB RAM or more recommended <BR /> <BR /><BR /> <BR /><BR />If you are putting the Vulnerability and Patch Management software on then I would recommend a 2GHz processor with 2GB memory.<BR /> Wed, 01 Jun 2005 18:53:53 GMT https://community.hpe.com/t5/server-management-systems/mxdomainmgr-exe-memory-issue/m-p/3552451#M12161 Brendan_25 2005-06-01T18:53:53Z