https://community.hpe.com/t5/server-management-systems/hpsim-notificaton-for-failure-in-proliant/m-p/3587216#M13161 I would like to know if HPSIM can be used to notify admin of a failure of a hard drive, and also to notify when recovery is finished for the failed hard drive. Thanks in advance. Wed, 20 Jul 2005 15:16:02 GMT Ben Garcia 2005-07-20T15:16:02Z https://community.hpe.com/t5/server-management-systems/hpsim-notificaton-for-failure-in-proliant/m-p/3587216#M13161 I would like to know if HPSIM can be used to notify admin of a failure of a hard drive, and also to notify when recovery is finished for the failed hard drive. Thanks in advance. Wed, 20 Jul 2005 15:16:02 GMT https://community.hpe.com/t5/server-management-systems/hpsim-notificaton-for-failure-in-proliant/m-p/3587216#M13161 Ben Garcia 2005-07-20T15:16:02Z https://community.hpe.com/t5/server-management-systems/hpsim-notificaton-for-failure-in-proliant/m-p/3587217#M13162 HPSIM can notify you of anything it is told about.<BR />For disks, it depends on where they are (local, MSA, EVA) and whether the relevent agents have been installed.<BR /><BR />A failure should certainly be reported. The agent would use snmp to send a trap to the HPSIM Server.<BR />Less certain about recovery completion, it may just turn up as an informational event. Wed, 20 Jul 2005 17:23:38 GMT https://community.hpe.com/t5/server-management-systems/hpsim-notificaton-for-failure-in-proliant/m-p/3587217#M13162 Rob Buxton 2005-07-20T17:23:38Z