topic Re: "All Systems" list empty even though DB contains lots of entries in Server Management - Systems Insight Manager

"All Systems" list empty even though DB contains lots of entries

Tom_437 — Thu, 01 Sep 2005 06:33:40 GMT

Hi,

I have been given an Insight manager 4.2 SP2 installation to manage. I understood that it had been setup with many servers in the systems lists for Linux and Windows, corresponding to our racks of servers.

However these lists are now completely blank, with no entries. I can see that the CMS server is talking to the servers via SNMP on the correct community string, and I can ping the servers that are supposed to be in the lists from the CMS. But still no servers show in the systems list.

Am I doing something silly here?

Thanks,

Tom

Re: "All Systems" list empty even though DB contains lots of entries

Tom_437 — Thu, 01 Sep 2005 06:41:44 GMT

I disabled the filter on the discovery, and manually ran a discovery - Nothing was added.

I also tried to manually add servers, but first it replies adding the server, and on subsequent tries it returns;
"The system could not be added for the following reasons:

A system already exists with the name you provided. Please use a unique name. "

But nada in the system list

Re: "All Systems" list empty even though DB contains lots of entries

sandu_1 — Thu, 01 Sep 2005 07:34:05 GMT

Check if you have proper authorizations granted to access the machines. If not grant authorizations to the user on all the nodes from "users and authorizations" page and execute some system lists, say "All Systems".

Re: "All Systems" list empty even though DB contains lots of entries

Tom_437 — Thu, 01 Sep 2005 08:08:39 GMT

In the users list there were 2 entries for the admin user I was using. It seems that was causing a conflict for the Authorizations.

Once one of those was deleted, all the system entries returned to the the list.

Genius!

Thanks,

Tom

Re: "All Systems" list empty even though DB contains lots of entries

Abdul Elabbar — Fri, 02 Sep 2005 04:49:14 GMT

i have a similar problem on 5.0 actually, after discovering the systems i dont get them on the left window or when i click on all systems. but when i search for a name it brings it up and i can use it from there.