https://community.hpe.com/t5/server-management-systems/monitor-services/m-p/3623942#M14564 The HP Agents can be configured to send an SNMP Trap if a particular Service stops or starts.<BR /><BR />On the Server go to Control Panel and run up the HP Management AGents Gui. Go to the Process Monitor Tab.<BR />Note also that you need to ensure that the Server is configured to send SNMP Traps to the HPSIM Server. You can test that works from the same GUI.<BR /> Mon, 12 Sep 2005 19:22:27 GMT Rob Buxton 2005-09-12T19:22:27Z https://community.hpe.com/t5/server-management-systems/monitor-services/m-p/3623941#M14563 Is there anyway inside of SIM to monitor individual services on a server? If so how? I'm using HP SIM v5.0 Mon, 12 Sep 2005 11:53:56 GMT https://community.hpe.com/t5/server-management-systems/monitor-services/m-p/3623941#M14563 Jonathan Clark_2 2005-09-12T11:53:56Z https://community.hpe.com/t5/server-management-systems/monitor-services/m-p/3623942#M14564 The HP Agents can be configured to send an SNMP Trap if a particular Service stops or starts.<BR /><BR />On the Server go to Control Panel and run up the HP Management AGents Gui. Go to the Process Monitor Tab.<BR />Note also that you need to ensure that the Server is configured to send SNMP Traps to the HPSIM Server. You can test that works from the same GUI.<BR /> Mon, 12 Sep 2005 19:22:27 GMT https://community.hpe.com/t5/server-management-systems/monitor-services/m-p/3623942#M14564 Rob Buxton 2005-09-12T19:22:27Z