https://community.hpe.com/t5/server-management-systems/setting-thresholds-per-volume/m-p/3633798#M15052 awesome thanks Thu, 13 Oct 2005 10:29:00 GMT Jonathan Clark_2 2005-10-13T10:29:00Z https://community.hpe.com/t5/server-management-systems/setting-thresholds-per-volume/m-p/3633796#M15050 Is this possible to set disk thresholds per volume?<BR /><BR />I can only see an option to set a threshold however does it monitor all volumes? Can I set seperate ones per volume? Fri, 23 Sep 2005 16:16:03 GMT https://community.hpe.com/t5/server-management-systems/setting-thresholds-per-volume/m-p/3633796#M15050 Jonathan Clark_2 2005-09-23T16:16:03Z https://community.hpe.com/t5/server-management-systems/setting-thresholds-per-volume/m-p/3633797#M15051 Yes, you can set thresholds per volume. But I guess it depends on your hardware/management processor and Support Pack version what's visible in the Systems Management Homepage of your Managed System.<BR /><BR />On your Managed System, open the Systems Management Homepage, click "Performance", and select what hardware you want to monitor for performance. I have attached a screendump for disk thresholds.<BR /><BR />You might want to configure one representative system with the correct thresholds and replicate them over the network using the HPSIM console, Configure/Replicate Agent Settings.<BR /><BR />Good Luck! Thu, 13 Oct 2005 07:11:10 GMT https://community.hpe.com/t5/server-management-systems/setting-thresholds-per-volume/m-p/3633797#M15051 Ferry Steenvoorde 2005-10-13T07:11:10Z https://community.hpe.com/t5/server-management-systems/setting-thresholds-per-volume/m-p/3633798#M15052 awesome thanks Thu, 13 Oct 2005 10:29:00 GMT https://community.hpe.com/t5/server-management-systems/setting-thresholds-per-volume/m-p/3633798#M15052 Jonathan Clark_2 2005-10-13T10:29:00Z