topic Re: SIM5 not properly detecting downed servers? in Server Management - Systems Insight Manager

SIM5 not properly detecting downed servers?

Preston Gallwas — Wed, 28 Sep 2005 16:12:26 GMT

I have my SIM ICMP set to ping, and 10s timeout 10 retries...yet after a server of ours was down for over three hours, SIM still showed it green.

What gives?

Re: SIM5 not properly detecting downed servers?

James Kennedy_4 — Thu, 29 Sep 2005 07:20:22 GMT

I'm having this same problem. Major and Minor server problems are being reported correctly, but down servers that should report as Critical are not, they are staying Green. I have servers that are powered OFF, and SIM shows them GREEN forever.

Is your install an upgrade? Mine was a 4.2 to 5.0 upgrade, this could be a possible database problem. Definately a big problem though, we need to fix this ASAP.

Re: SIM5 not properly detecting downed servers?

Joel Rubenstein — Thu, 29 Sep 2005 08:37:55 GMT

In all cases reported to date the problem has been resolved by going to Tasks and Logs --> View All Scheduled Tasks. Selecting the "Hardware Status Polling for Servers" task, clicking edit and stepping through all the screens but making no changes. After clicking done the task should work correctly.

Re: SIM5 not properly detecting downed servers?

James Kennedy_4 — Thu, 29 Sep 2005 11:47:38 GMT

Joel,
Thank you, that worked for me!

Re: SIM5 not properly detecting downed servers?

Darrin Rawls — Thu, 29 Sep 2005 22:41:28 GMT

Was this a fresh install of SIM 5 or an upgrade from 4.x? I assume an upgrade. From what version though (4.1, 4.2, 4.2 SP2, etc.).

thanks.

Re: SIM5 not properly detecting downed servers?

Joel Rubenstein — Fri, 30 Sep 2005 07:39:33 GMT

The problem has only be observed on upgrades from 4.2 --> 5.0. Not sure if they were from 4.2 or 4.2 SP2 and the problem does not occur on every upgrade.

Re: SIM5 not properly detecting downed servers?

Preston Gallwas — Fri, 30 Sep 2005 10:07:49 GMT

This was not an upgrade; This solved my problem

Re: SIM5 not properly detecting downed servers?

James Kennedy_4 — Tue, 04 Oct 2005 07:04:38 GMT

Just an FYI for anyone that runs into this. You should also do the same procedure on the "Hardware status for non servers" job because that job has the same problem, and known servers may become "unknown" when they are down and the data collection has run on that server.