https://community.hpe.com/t5/server-management-systems/new-to-sim-4-2/m-p/3640957#M15265 For the software status to get updated you need VCA installed on the managed node and the same has to point to a valid repository(VCRM). Having done that, you'll have to run the Sofware status polling task for the status to get updated. Tue, 04 Oct 2005 02:33:06 GMT Aravindh Rajaram 2005-10-04T02:33:06Z https://community.hpe.com/t5/server-management-systems/new-to-sim-4-2/m-p/3640956#M15264 I have just installed SIM 4.2 on a DC7100c workstation. THe software has managed to collect hardware information on my workstation, but it has not collected any software. How do I go about doing that? Does have to do anything with HP Version Control Repository Manager? Do I need to install a VCP agent? Tue, 04 Oct 2005 02:30:04 GMT https://community.hpe.com/t5/server-management-systems/new-to-sim-4-2/m-p/3640956#M15264 Albert Austin 2005-10-04T02:30:04Z https://community.hpe.com/t5/server-management-systems/new-to-sim-4-2/m-p/3640957#M15265 For the software status to get updated you need VCA installed on the managed node and the same has to point to a valid repository(VCRM). Having done that, you'll have to run the Sofware status polling task for the status to get updated. Tue, 04 Oct 2005 02:33:06 GMT https://community.hpe.com/t5/server-management-systems/new-to-sim-4-2/m-p/3640957#M15265 Aravindh Rajaram 2005-10-04T02:33:06Z https://community.hpe.com/t5/server-management-systems/new-to-sim-4-2/m-p/3640958#M15266 Thanks, thought that was what needed to be done. Well the next question is then, are the agents for a particular workstation/server? I tried to install an agent just earlier an it refused to install. My management workstation is a DC7100c.<BR />Thanks a lot again! Tue, 04 Oct 2005 02:55:11 GMT https://community.hpe.com/t5/server-management-systems/new-to-sim-4-2/m-p/3640958#M15266 Albert Austin 2005-10-04T02:55:11Z https://community.hpe.com/t5/server-management-systems/new-to-sim-4-2/m-p/3640959#M15267 HP currently provides Management Agents are supported only for servers. For Workstations and Desktops you'll have to either use the WBEM protocol (WMI in windows) or you have to go to the HP Client Management Infrastructure. The same provides a HPSIM connector which inturn helps HPSIM manage desktops. To know more about the HP Client Management Infrastructure visit <A href="http://www.hp.com/go/easydeploy" target="_blank">http://www.hp.com/go/easydeploy</A><BR /><BR />Hope this helps. Tue, 04 Oct 2005 03:20:27 GMT https://community.hpe.com/t5/server-management-systems/new-to-sim-4-2/m-p/3640959#M15267 Aravindh Rajaram 2005-10-04T03:20:27Z https://community.hpe.com/t5/server-management-systems/new-to-sim-4-2/m-p/3640960#M15268 Cheers! Will follow it up. Tue, 04 Oct 2005 03:22:07 GMT https://community.hpe.com/t5/server-management-systems/new-to-sim-4-2/m-p/3640960#M15268 Albert Austin 2005-10-04T03:22:07Z