https://community.hpe.com/t5/server-management-systems/sim-using-network-address-translation-nat/m-p/3642274#M15318 See <A href="http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=959351" target="_blank">http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=959351</A> Wed, 05 Oct 2005 09:14:09 GMT David Claypool 2005-10-05T09:14:09Z https://community.hpe.com/t5/server-management-systems/sim-using-network-address-translation-nat/m-p/3642273#M15317 The HP Insight manager agents send alerts of thresholds/faults using SMNP, however we have servers setup through firewalls that we would like to manage, the problem being that SMNP doesn’t work when you are using Network Address Translation (NAT) the SNMP packet contains the original IP Address of the server which the SIM console doesn’t know about.<BR /><BR />So my question is can you configure ether SNMP or the HP Agents to send the hostname as appose to the IP Address??<BR /> Wed, 05 Oct 2005 06:17:26 GMT https://community.hpe.com/t5/server-management-systems/sim-using-network-address-translation-nat/m-p/3642273#M15317 Brian Charlton 2005-10-05T06:17:26Z https://community.hpe.com/t5/server-management-systems/sim-using-network-address-translation-nat/m-p/3642274#M15318 See <A href="http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=959351" target="_blank">http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=959351</A> Wed, 05 Oct 2005 09:14:09 GMT https://community.hpe.com/t5/server-management-systems/sim-using-network-address-translation-nat/m-p/3642274#M15318 David Claypool 2005-10-05T09:14:09Z