https://community.hpe.com/t5/server-management-systems/wwn-numbers/m-p/3213374#M1576 I basically am at a site that has a couple of brocade switches (compaq switch 16's). None of the cables have been labelled so I can list ports to wwn numbers from the switch but need to work out what server is plugged into what, preferably without having to trace the cables!<BR /><BR />I assumed that as the cards are HP/Compaq rebranded Emulex cards, that this kind of info would be avaliable through IM but maybe not? I not it would certainly be helpful to have this info in the same way you can get IP/MAC addresses listed through IM.<BR /><BR />There is also a SAN Management 2 box as well but I can't seem to find this info under HP Openview on that either.<BR /><BR />The servers are a mixture of ML/DL G2/G3's currently running 6.40 Agents.<BR /><BR /> Wed, 10 Mar 2004 05:36:20 GMT Daniel Smith_7 2004-03-10T05:36:20Z https://community.hpe.com/t5/server-management-systems/wwn-numbers/m-p/3213372#M1574 I have several servers with Emulex HBA's in but am unable to find a way to report the WWN numbers on these cards from Insight Manager.<BR /><BR />Do I need extra MIB's?<BR /><BR />Any ideas would be appreciated. Tue, 09 Mar 2004 09:04:24 GMT https://community.hpe.com/t5/server-management-systems/wwn-numbers/m-p/3213372#M1574 Daniel Smith_7 2004-03-09T09:04:24Z https://community.hpe.com/t5/server-management-systems/wwn-numbers/m-p/3213373#M1575 Do you mean using the Reports Option or just to be able to see the details from IM?<BR />For the latter from the System Management Home Page go to: Storage / External Storage Connections.<BR /><BR />It doesn't look as though it's information available from the supplied Reports, I don't know if this info is stored in the database, you may be able to extract it directly from there. <BR /> Tue, 09 Mar 2004 14:21:56 GMT https://community.hpe.com/t5/server-management-systems/wwn-numbers/m-p/3213373#M1575 Rob Buxton 2004-03-09T14:21:56Z https://community.hpe.com/t5/server-management-systems/wwn-numbers/m-p/3213374#M1576 I basically am at a site that has a couple of brocade switches (compaq switch 16's). None of the cables have been labelled so I can list ports to wwn numbers from the switch but need to work out what server is plugged into what, preferably without having to trace the cables!<BR /><BR />I assumed that as the cards are HP/Compaq rebranded Emulex cards, that this kind of info would be avaliable through IM but maybe not? I not it would certainly be helpful to have this info in the same way you can get IP/MAC addresses listed through IM.<BR /><BR />There is also a SAN Management 2 box as well but I can't seem to find this info under HP Openview on that either.<BR /><BR />The servers are a mixture of ML/DL G2/G3's currently running 6.40 Agents.<BR /><BR /> Wed, 10 Mar 2004 05:36:20 GMT https://community.hpe.com/t5/server-management-systems/wwn-numbers/m-p/3213374#M1576 Daniel Smith_7 2004-03-10T05:36:20Z https://community.hpe.com/t5/server-management-systems/wwn-numbers/m-p/3213375#M1577 If they are the Emulex rebranded HBA's there's also the lputilnt utility that should be installed on most SAN Connected Proliant Servers.<BR />You should just be able to use the Run Command. Select Configuration Data.<BR /><BR />Not sure about the later SAN Switches but with our 2/16EL's you can then browse to the switch, or telnet to it. You can then see which WWN the Port is connected to.<BR /><BR />This should give you both ends of the connection.<BR /><BR /> Wed, 10 Mar 2004 14:20:36 GMT https://community.hpe.com/t5/server-management-systems/wwn-numbers/m-p/3213375#M1577 Rob Buxton 2004-03-10T14:20:36Z https://community.hpe.com/t5/server-management-systems/wwn-numbers/m-p/3213376#M1578 Thanks, I ended up doing this but wanted to try and avoid having to log on to 20+ servers.<BR /><BR />Regards<BR /><BR />Dan<BR /><BR /> Thu, 18 Mar 2004 12:44:05 GMT https://community.hpe.com/t5/server-management-systems/wwn-numbers/m-p/3213376#M1578 Daniel Smith_7 2004-03-18T12:44:05Z