https://community.hpe.com/t5/server-management-systems/hp-system-insight-manager/m-p/3660685#M15955 in the new insight (v.5), i cann't see the ststus of the compaq ups.<BR />how can i solve it? is there any agent?<BR /><BR /><BR />p.s. - in the old version it was possible. Sun, 30 Oct 2005 07:30:17 GMT asaf navaro 2005-10-30T07:30:17Z https://community.hpe.com/t5/server-management-systems/hp-system-insight-manager/m-p/3660685#M15955 in the new insight (v.5), i cann't see the ststus of the compaq ups.<BR />how can i solve it? is there any agent?<BR /><BR /><BR />p.s. - in the old version it was possible. Sun, 30 Oct 2005 07:30:17 GMT https://community.hpe.com/t5/server-management-systems/hp-system-insight-manager/m-p/3660685#M15955 asaf navaro 2005-10-30T07:30:17Z https://community.hpe.com/t5/server-management-systems/hp-system-insight-manager/m-p/3660686#M15956 Asaf, Shalom !<BR />Check you have MIB definition for your UPS in "Manage system types".<BR />If you doesn't have - add it.<BR /><BR />Regards, Igor Sun, 30 Oct 2005 09:28:28 GMT https://community.hpe.com/t5/server-management-systems/hp-system-insight-manager/m-p/3660686#M15956 Igor Karasik 2005-10-30T09:28:28Z https://community.hpe.com/t5/server-management-systems/hp-system-insight-manager/m-p/3660687#M15957 Are you using the same Server for the new HPSIM? perhaps the SNMP on the UPS needs the new Server added as an acceptable host? Sun, 30 Oct 2005 14:19:33 GMT https://community.hpe.com/t5/server-management-systems/hp-system-insight-manager/m-p/3660687#M15957 Rob Buxton 2005-10-30T14:19:33Z