https://community.hpe.com/t5/server-management-systems/selecting-vca-status-in-sim/m-p/3665775#M16197 I'm trying to create a query that will list all servers with VCA's = not configured, or at least with versions lower than 7.40, but I can't seem to find any values that will work.<BR />The query supports only the = sign, i.e. I can select SSD version = 7.10 but if I then try to add another selection SSD version = 7.20 the collection will show up empty.<BR />And there's no way at all that I can find to show VCA's which are either not configured or not found. Is there any way to do this at all from within SIM or do I need a 3rd party tool for this ? Mon, 07 Nov 2005 09:37:35 GMT Mikael Rönnbäck 2005-11-07T09:37:35Z https://community.hpe.com/t5/server-management-systems/selecting-vca-status-in-sim/m-p/3665775#M16197 I'm trying to create a query that will list all servers with VCA's = not configured, or at least with versions lower than 7.40, but I can't seem to find any values that will work.<BR />The query supports only the = sign, i.e. I can select SSD version = 7.10 but if I then try to add another selection SSD version = 7.20 the collection will show up empty.<BR />And there's no way at all that I can find to show VCA's which are either not configured or not found. Is there any way to do this at all from within SIM or do I need a 3rd party tool for this ? Mon, 07 Nov 2005 09:37:35 GMT https://community.hpe.com/t5/server-management-systems/selecting-vca-status-in-sim/m-p/3665775#M16197 Mikael Rönnbäck 2005-11-07T09:37:35Z