https://community.hpe.com/t5/server-management-systems/problem-power-supply/m-p/3671683#M16412 Hallo,<BR />check your SNMP Configuration! Wed, 16 Nov 2005 03:37:57 GMT Hense, Klaus 2005-11-16T03:37:57Z https://community.hpe.com/t5/server-management-systems/problem-power-supply/m-p/3671682#M16411 I've installed HP SIM on my principal server and I've met some troubles : <BR />For exemple, in SIM, a server is signaled as " Health Status" but, when I open HP Server Agent, I can see that there is a problem about the Power Supply. <BR /><BR />What have I to do to be warn about that sort of troubles?<BR /><BR />Greetings Tue, 15 Nov 2005 02:43:39 GMT https://community.hpe.com/t5/server-management-systems/problem-power-supply/m-p/3671682#M16411 Roualin 2005-11-15T02:43:39Z https://community.hpe.com/t5/server-management-systems/problem-power-supply/m-p/3671683#M16412 Hallo,<BR />check your SNMP Configuration! Wed, 16 Nov 2005 03:37:57 GMT https://community.hpe.com/t5/server-management-systems/problem-power-supply/m-p/3671683#M16412 Hense, Klaus 2005-11-16T03:37:57Z https://community.hpe.com/t5/server-management-systems/problem-power-supply/m-p/3671684#M16413 It can depend on Agents and versions.<BR /><BR />But, if there's an agent to pick up the error then it needs to send the Trap.<BR />So, you need the SIM Server entered as the trap Destination under the Traps Tab in the SNMP Configuration GUI. Thu, 17 Nov 2005 03:20:49 GMT https://community.hpe.com/t5/server-management-systems/problem-power-supply/m-p/3671684#M16413 Rob Buxton 2005-11-17T03:20:49Z