https://community.hpe.com/t5/server-management-systems/msa500-and-hp-sim-5-0/m-p/3696560#M17218 Hi<BR /><BR />According to the following doc, the MSA 500 is not supported. Only MSA1000 and 1500 are.<BR /><A href="http://h10018.www1.hp.com/wwsolutions/misc/hpsim-helpfiles/msa_provider.pdf" target="_blank">http://h10018.www1.hp.com/wwsolutions/misc/hpsim-helpfiles/msa_provider.pdf</A><BR /><BR />To get your storage discovered by HPSIM, you need to install a SMI-S provider on one of the server connected to the storage box. <BR /><BR />Volumes created on the array and presented to the server (logical drives) can be monitored with PMP (to get performance data) and disk usage thresholds can be set as well through the system maangement homepage.<BR /><BR />regards<BR /><BR />frederic. Thu, 12 Jan 2006 13:27:35 GMT fred Passeron 2006-01-12T13:27:35Z https://community.hpe.com/t5/server-management-systems/msa500-and-hp-sim-5-0/m-p/3696559#M17217 Hi,<BR /><BR />HP SIM does not 'see' my storage.<BR />HP SIM is installed on the same server (a ML350 G3) as where the MSA500 is attached.<BR />The latest Proliant Support Pack is installed on the server. Storage Essentials is NOT installed on the Central Management Server.<BR /><BR />Martien Thu, 22 Dec 2005 03:47:32 GMT https://community.hpe.com/t5/server-management-systems/msa500-and-hp-sim-5-0/m-p/3696559#M17217 Martien Korenblom 2005-12-22T03:47:32Z https://community.hpe.com/t5/server-management-systems/msa500-and-hp-sim-5-0/m-p/3696560#M17218 Hi<BR /><BR />According to the following doc, the MSA 500 is not supported. Only MSA1000 and 1500 are.<BR /><A href="http://h10018.www1.hp.com/wwsolutions/misc/hpsim-helpfiles/msa_provider.pdf" target="_blank">http://h10018.www1.hp.com/wwsolutions/misc/hpsim-helpfiles/msa_provider.pdf</A><BR /><BR />To get your storage discovered by HPSIM, you need to install a SMI-S provider on one of the server connected to the storage box. <BR /><BR />Volumes created on the array and presented to the server (logical drives) can be monitored with PMP (to get performance data) and disk usage thresholds can be set as well through the system maangement homepage.<BR /><BR />regards<BR /><BR />frederic. Thu, 12 Jan 2006 13:27:35 GMT https://community.hpe.com/t5/server-management-systems/msa500-and-hp-sim-5-0/m-p/3696560#M17218 fred Passeron 2006-01-12T13:27:35Z