https://community.hpe.com/t5/server-management-systems/hpsim-v5-snmp-trap-severity-changed-has-no-effect/m-p/3696561#M17219 I am receiving SNMP traps about "Tape Drive Cleaning Required (5008)". The default severity for this trap is "Critical". However, I am forwarding these traps based on severity (critical &amp; major through SMS, other severities by email only).<BR />I was trying to modify the severity of that Trap to Minor. In HPSIM v5 database, it seems to have recorded the change.<BR />However, I still receive this trap by email and SMS with severity=Critical.<BR /><BR />For some other traps, this change worked fine.<BR /><BR />Why is it not working with this particular trap?<BR /><BR />thanks Thu, 22 Dec 2005 04:03:47 GMT PierreParis 2005-12-22T04:03:47Z https://community.hpe.com/t5/server-management-systems/hpsim-v5-snmp-trap-severity-changed-has-no-effect/m-p/3696561#M17219 I am receiving SNMP traps about "Tape Drive Cleaning Required (5008)". The default severity for this trap is "Critical". However, I am forwarding these traps based on severity (critical &amp; major through SMS, other severities by email only).<BR />I was trying to modify the severity of that Trap to Minor. In HPSIM v5 database, it seems to have recorded the change.<BR />However, I still receive this trap by email and SMS with severity=Critical.<BR /><BR />For some other traps, this change worked fine.<BR /><BR />Why is it not working with this particular trap?<BR /><BR />thanks Thu, 22 Dec 2005 04:03:47 GMT https://community.hpe.com/t5/server-management-systems/hpsim-v5-snmp-trap-severity-changed-has-no-effect/m-p/3696561#M17219 PierreParis 2005-12-22T04:03:47Z https://community.hpe.com/t5/server-management-systems/hpsim-v5-snmp-trap-severity-changed-has-no-effect/m-p/3696562#M17220 From the SIM 5 readme <BR /><BR />The traps listed below have their status dynamically assigned based <BR />on the data that is received from the trap:<BR /><BR /> - cpqFcaLogDrvStatusChange<BR /> - cpqFcaSpareStatusChange<BR /> - cpqFcTapeCntlrStatusChange<BR /> - cpqFca2PhyDrvStatusChange<BR /> - cpqFca2AccelStatusChange<BR /> - cpqFca2CntlrStatusChange<BR /> - cpqExtArrayLogDrvStatusChange<BR /> - cpqExtTapeDriveStatusChange<BR /> - cpqExtTapeLibraryStatusChange<BR /> - cpqExtTapeLibraryDoorStatusChange<BR /> - cpqFca3HostCntlrStatusChange<BR /> - cpqDa6CntlrStatusChange<BR /> - cpqDa6LogDrvStatusChange<BR /> - cpqDa6SpareStatusChange<BR /> - cpqDa6PhyDrvStatusChange<BR /> - cpqDa6AccelStatusChange<BR /> - cpqDa6TapeLibraryStatusChange<BR /> - cpqDa6TapeLibraryDoorStatusChange<BR /> - cpqDa6TapeDriveStatusChange<BR /> - cpqIdeAtaDiskStatusChange<BR /> - cpqIdeLogicalDriveStatusChange<BR /> - cpqScsi3CntlrStatusChange<BR /> - cpqScsiCdLibraryStatusChange<BR /> - cpqTapeLibraryStatusChange<BR /> - cpqTape5PhyDrvStatusChange<BR /> - cpqScsi5PhyDrvStatusChange<BR /> - cpqScsi3LogDrvStatusChange<BR /> - cpqSsExPowerSupplyUpsStatusChange<BR /> - cpqSsExTempSensorStatusChange<BR /> - cpqSsEx2FanStatusChange<BR /> - cpqSsEx2PowerSupplyStatusChange<BR /> - cpqSsExBackplaneFanStatusChange<BR /> - cpqSsExBackplaneTempStatusChange<BR /> - cpqSsExBackplanePowerSupplyStatusChange<BR /> - cpqSs5FanStatusChange<BR /> - cpqSs5TempStatusChange<BR /> - cpqSs5PwrSupplyStatusChange<BR /><BR />Even though the 5008 trap is not listed as having a dynamic status I verified that it does assign the status dynamically. If the drive condition is not OK then a critical status will be set. Thu, 22 Dec 2005 09:27:23 GMT https://community.hpe.com/t5/server-management-systems/hpsim-v5-snmp-trap-severity-changed-has-no-effect/m-p/3696562#M17220 Joel Rubenstein 2005-12-22T09:27:23Z