https://community.hpe.com/t5/server-management-systems/sim-5-0-data-collection/m-p/3707147#M17562 I'm trying to do a Data Collection of a server that everything works (SNMP Identify, VCAGENT, SMH, etc.) but when I run the task, it errors out with:<BR /><BR />An error occurred connecting to this system with the WBEM protocol. Check the system configuration.<BR /><BR />Any Ideas? Wed, 11 Jan 2006 13:03:52 GMT Brian Wright_1 2006-01-11T13:03:52Z https://community.hpe.com/t5/server-management-systems/sim-5-0-data-collection/m-p/3707147#M17562 I'm trying to do a Data Collection of a server that everything works (SNMP Identify, VCAGENT, SMH, etc.) but when I run the task, it errors out with:<BR /><BR />An error occurred connecting to this system with the WBEM protocol. Check the system configuration.<BR /><BR />Any Ideas? Wed, 11 Jan 2006 13:03:52 GMT https://community.hpe.com/t5/server-management-systems/sim-5-0-data-collection/m-p/3707147#M17562 Brian Wright_1 2006-01-11T13:03:52Z https://community.hpe.com/t5/server-management-systems/sim-5-0-data-collection/m-p/3707148#M17563 From HPSIM, click on the Server name, click the tools &amp; links tab, then System Protocol Settings.<BR /><BR />Check the WBEM settings, is it using Global and would these credentials work on this server. Maybe try setting System specific credentials.<BR /><BR />In an AD Domain, the username will be of the form domain\username.<BR />Don't worry about the Port Number (well I don't). Wed, 11 Jan 2006 14:09:21 GMT https://community.hpe.com/t5/server-management-systems/sim-5-0-data-collection/m-p/3707148#M17563 Rob Buxton 2006-01-11T14:09:21Z