topic SIM 5.0 SP3 Cluster Monitor with a blank frame in Server Management - Systems Insight Manager

SIM 5.0 SP3 Cluster Monitor with a blank frame

Paul Kratz — Tue, 24 Jan 2006 08:13:15 GMT

We have installed HP SIM 5.0 SP2. Our MSCE Cluster is identified as a MSCE Cluster. But when we klick on the Clustername we would expect to see the Cluster Monitor with Cluster Informations. All we get is a blank frame with the Title Cluster Monitor and the Cluster Name.
We did an update to SP3. No changes!

Re: SIM 5.0 SP3 Cluster Monitor with a blank frame

NJK-Work — Tue, 24 Jan 2006 11:27:10 GMT

I am having the same problem - just noticed it yesterday. I have not tried SP3 yet, but from the sounds of it, it does not fix the problem based on your experiences.

I dont know when the problem started happening, but I just noticed it yesterday after I built a new 3-node cluster and added it to SIM.

I know of nothing that has changed in SIM itself, but obviously there have MS security updates added to the server recently.

I would be curious to know if others are having the same problem.

Re: SIM 5.0 SP3 Cluster Monitor with a blank frame

Ole Thomsen_1 — Wed, 25 Jan 2006 09:17:12 GMT

Same here, previously in SP2 and now also in SP3.

Ole Thomsen

Re: SIM 5.0 SP3 Cluster Monitor with a blank frame

Rafael Camillo — Mon, 06 Feb 2006 06:03:37 GMT

Same here too.

Exactly the same problem.
Even with SP2 or SP3.

Re: SIM 5.0 SP3 Cluster Monitor with a blank frame

Daniel Leblanc — Mon, 06 Feb 2006 11:26:34 GMT

SAme here with SP3'HELPPPPP!!!

Re: SIM 5.0 SP3 Cluster Monitor with a blank frame

Etienne Beureux — Mon, 13 Feb 2006 11:03:09 GMT

You are not alone indeed... :)

http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=961138

Re: SIM 5.0 SP3 Cluster Monitor with a blank frame

NJK-Work — Tue, 14 Feb 2006 10:40:57 GMT

Mine starting working today (or at least I discovered it today).

The only thing I did was reboot my SIM server a few days ago. I had already tried that and it did not fix the problem then. But now it works?

No clue...but at least its working.
Nelson

Re: SIM 5.0 SP3 Cluster Monitor with a blank frame

NJK-Work — Tue, 14 Feb 2006 10:44:52 GMT

Netware clustering monitor still does not work - but then again, it never did with SIM5.

Nelson

Re: SIM 5.0 SP3 Cluster Monitor with a blank frame

Ole Thomsen_1 — Sat, 24 Jun 2006 10:42:09 GMT

After upgrading to SP5 my cluster monitor is OK :-)

Ole Thomsen

Re: SIM 5.0 SP3 Cluster Monitor with a blank frame

Etienne Beureux — Tue, 27 Jun 2006 02:00:31 GMT

SP5 did not fix the problem with MSCS clusters here...

Re: SIM 5.0 SP3 Cluster Monitor with a blank frame

disabled2408 — Fri, 04 Aug 2006 04:40:58 GMT

We have the same Problem with SIM 5. Since we installed SP5 it works somtimes (i.a. every 20 tryes)

Re: SIM 5.0 SP3 Cluster Monitor with a blank frame

George Kovach — Thu, 07 Dec 2006 12:17:03 GMT

Has anybody determined what the problem was? I'm still having this issue.

Re: SIM 5.0 SP3 Cluster Monitor with a blank frame

disabled2408 — Fri, 08 Dec 2006 01:43:17 GMT

We are now running SIM 5.0 SP5. Since i deleted all physical Cluster nodes and virtual Machines and reinserted the Clusert nodes (Manual discovery), everything is working fine.

Olaf.

Re: SIM 5.0 SP3 Cluster Monitor with a blank frame

George Kovach — Fri, 08 Dec 2006 16:52:19 GMT

I tried this; even adding them manually, by IP and specifying type (Server or Cluster). Still no go. I was running an older version and uninstalled it and loaded 5.0 SP5. The only difference is that I loaded it with an account that has local admin on the HPSIM server and local admin on each of the cluster nodes (Trying to limit the accounts that have admin access). Does this make a difference? The cluster info is there on the nodes on the HP System Management Homepage; it seems HPSIM just won't display it.

Thanks

GMKovach

Re: SIM 5.0 SP3 Cluster Monitor with a blank frame

ACKER_2 — Fri, 18 May 2007 16:11:28 GMT

Same problem, with Sim 5.1, Fresh Install
I had many problems to discover the cluster itself, and know ; status unknown, blank page when following the cluster link.

Has anyone found what the problem is ?

Re: SIM 5.0 SP3 Cluster Monitor with a blank frame

ACKER_2 — Fri, 18 May 2007 16:21:16 GMT

refreshing the blank page causes HP SIM to display an error msg stating that it can't retrieve cluster info. It asks us to check the first SNMP community, to check the cluster is correctly configured, and running...

Has anyone a link to a document specifying how to configure everything, sothat i can check ????

Thank U