topic Re: Configure Traps in all my Monitored devices in Server Management - Systems Insight Manager

Configure Traps in all my Monitored devices

orven — Wed, 25 Jan 2006 05:48:14 GMT

I'm monitoring 200 servers and need to to make sure that Destination Trap is poperly set to my new HP SIM5. Is there like a script or somthing to do it rather than one by one?

Thanks

Re: Configure Traps in all my Monitored devices

Paul Kratz — Wed, 25 Jan 2006 05:58:10 GMT

HP SIM has a Task called "Configure or Repair Agents ..." you will finde in the "Configure" Menu. With that Task you can do some basic configurations to the Servers.

Check the following Document for detailed informations:
http://h10018.www1.hp.com/wwsolutions/misc/hpsim-helpfiles/repairAgents_5.pdf

Re: Configure Traps in all my Monitored devices

orven — Wed, 25 Jan 2006 09:15:02 GMT

Thanks, is there a way to roll back just in case? I will apply it to all my boxes.

Just in case there are some special SNMP settings somewhere? will it remove the existing SNMP string or it will just add?

Any role back procedure

Re: Configure Traps in all my Monitored devices

Paul Kratz — Wed, 25 Jan 2006 09:36:25 GMT

It will just add!