topic CPU Load in Server Management - Systems Insight Manager

CPU Load

Yaroslav_6 — Fri, 03 Mar 2006 03:38:42 GMT

Hi!Can I monitor CPU load on HP servers with HP SIM 5 ? Thank you!

Re: CPU Load

Ferry Steenvoorde — Fri, 03 Mar 2006 04:08:15 GMT

Yes, though your hardware may limit the items you can monitor.

-Open a Suystems Management Homepage (SMH)
-Select Performance, Processors
-Move the sliders to the required thresholds
-Click 'Save Thresholds'.

If the sliders do show up but you are unable to do this, verify:
-if you are using the correct version of JAVA (if in doubt, install the latest version on your Management Console).
-if the Managed Systems' SNMP Security-settings allow for a READ-WRITE community.

To replicate the same settings to other servers, open your HPSIM Console:
-Select Configure, Replicate Agent Settings
-Select Target Systems (where the settings will be replicated to)
-Next
-Select source system (the system you've just configured)
-Next
-Expand 'HP Foundation Agent', 'Threshold Settings', 'Threshold Properties'.
-Select the Thresholds that must be replicated.
-Schedule or Run Now.

Re: CPU Load

Yaroslav_6 — Fri, 03 Mar 2006 04:49:42 GMT

Thank you! But there is only CPU Time, how I can monitor CPU Usage?

Re: CPU Load

Ferry Steenvoorde — Fri, 03 Mar 2006 05:52:02 GMT

For that you need the Performance Management Pack. With the HPSIM installation you get a free 30-day license for monitoring the HPSIM-server plus 5 additional Managed Systems.

After that, you'll have to pay for PMP licenses.

Guessing you have installed everything during the HPSIM installation, activate PMP:
-Select Options, Performance Management Pack Options, Configuration
-Select the required servers
-Select Apply
-Wait for about 15-30 minutes before any Performance statistics have been gathered.

Re: CPU Load

Yaroslav_6 — Fri, 03 Mar 2006 06:36:21 GMT

Thank you! =)