https://community.hpe.com/t5/server-management-systems/version-control-agent-error-on-win2k/m-p/3222821#M1888 This is probably referring to disk space on the system with VCRM...<BR /><BR />Otherwise, confirm that the SNMP service on the device in question is set to allow requests from LOCALHOST. Thu, 18 Mar 2004 11:43:44 GMT David Claypool 2004-03-18T11:43:44Z https://community.hpe.com/t5/server-management-systems/version-control-agent-error-on-win2k/m-p/3222820#M1887 Hi <BR /><BR />I get the following errors on a DL380 G3 when I want to view the Version control agent. I have verified that there is enough space as well as uninstalled the agent and reinstalled. I also deployed the latest support pack to the server. <BR />Can anyone can help me?<BR /><BR />1.VCA1079622775 3/18/2004 5:12:55 PM The Version Control Agent encountered an error while obtaining the software and firmware inventory. <BR />2.Not enough storage is available to process this command. 3/18/2004 5:12:55 PM An error occurred while performing an operating system specific operation. <BR /> <BR /> Thu, 18 Mar 2004 10:37:10 GMT https://community.hpe.com/t5/server-management-systems/version-control-agent-error-on-win2k/m-p/3222820#M1887 Tommy Ferreira 2004-03-18T10:37:10Z https://community.hpe.com/t5/server-management-systems/version-control-agent-error-on-win2k/m-p/3222821#M1888 This is probably referring to disk space on the system with VCRM...<BR /><BR />Otherwise, confirm that the SNMP service on the device in question is set to allow requests from LOCALHOST. Thu, 18 Mar 2004 11:43:44 GMT https://community.hpe.com/t5/server-management-systems/version-control-agent-error-on-win2k/m-p/3222821#M1888 David Claypool 2004-03-18T11:43:44Z https://community.hpe.com/t5/server-management-systems/version-control-agent-error-on-win2k/m-p/3222822#M1889 I've always found this to be some kind of configuration problem. Why it refers to storage being available is a bit of a mystery. Thu, 18 Mar 2004 18:23:33 GMT https://community.hpe.com/t5/server-management-systems/version-control-agent-error-on-win2k/m-p/3222822#M1889 Rob Buxton 2004-03-18T18:23:33Z https://community.hpe.com/t5/server-management-systems/version-control-agent-error-on-win2k/m-p/3222823#M1890 Jip, you guys are right, I had SNMP securtiy and did not have localhost in the list of allowed to send SNMP packets. Very impressive guys!!!! Thank you very much. Fri, 19 Mar 2004 02:02:16 GMT https://community.hpe.com/t5/server-management-systems/version-control-agent-error-on-win2k/m-p/3222823#M1890 Tommy Ferreira 2004-03-19T02:02:16Z https://community.hpe.com/t5/server-management-systems/version-control-agent-error-on-win2k/m-p/3222824#M1891 What if you get the error from the IM server itself using the VC Agent. I have uninstalled HP Agents, VCA and removed snmp, added and config snmp, reinstalled VCA and HP agents but leaving the Manager alone. Still getting the error about storage. Procedures work with client machines but not the server.<BR /><BR />SNMP config to accept packets from all hosts.<BR /><BR />Any clues? Wed, 31 Mar 2004 13:18:50 GMT https://community.hpe.com/t5/server-management-systems/version-control-agent-error-on-win2k/m-p/3222824#M1891 sam kite 2004-03-31T13:18:50Z https://community.hpe.com/t5/server-management-systems/version-control-agent-error-on-win2k/m-p/3222825#M1892 I have attached how the SNMP settings on one of my hosts look, maybe this will help you? Thu, 01 Apr 2004 03:06:46 GMT https://community.hpe.com/t5/server-management-systems/version-control-agent-error-on-win2k/m-p/3222825#M1892 Tommy Ferreira 2004-04-01T03:06:46Z