https://community.hpe.com/t5/server-management-systems/repackaging-sim-agents-for-initial-install-on-rh-es3/m-p/3765842#M19528 See "Managing ProLiant servers with Linux" from <A href="http://www.hp.com/go/proliantlinux" target="_blank">http://www.hp.com/go/proliantlinux</A> --&gt; ProLiant + Linux Documentation and section 3-5-2 has what you need. Wed, 05 Apr 2006 01:53:26 GMT David Claypool 2006-04-05T01:53:26Z https://community.hpe.com/t5/server-management-systems/repackaging-sim-agents-for-initial-install-on-rh-es3/m-p/3765841#M19527 I have an environment with approx 200 Red Hat ES3 servers that I need to deploy HP SIM agents on. the configuration is common, including the kernel rev. What I want to do is repackage the installation in RPM format on a dev box so that I do not need any source code on the production servers durring installation.<BR /><BR />TIA for your help<BR />Bill Tue, 04 Apr 2006 18:39:01 GMT https://community.hpe.com/t5/server-management-systems/repackaging-sim-agents-for-initial-install-on-rh-es3/m-p/3765841#M19527 Bill Fastenau 2006-04-04T18:39:01Z https://community.hpe.com/t5/server-management-systems/repackaging-sim-agents-for-initial-install-on-rh-es3/m-p/3765842#M19528 See "Managing ProLiant servers with Linux" from <A href="http://www.hp.com/go/proliantlinux" target="_blank">http://www.hp.com/go/proliantlinux</A> --&gt; ProLiant + Linux Documentation and section 3-5-2 has what you need. Wed, 05 Apr 2006 01:53:26 GMT https://community.hpe.com/t5/server-management-systems/repackaging-sim-agents-for-initial-install-on-rh-es3/m-p/3765842#M19528 David Claypool 2006-04-05T01:53:26Z