topic Re: VCRM and update in Server Management - Systems Insight Manager

VCRM and update

Anthony_137 — Tue, 25 Apr 2006 04:09:08 GMT

Hello,

Since i've updated my smartstart HPSIM server with 7.50 version, my VCRM isn't accessible. The services VCA and VCR are running but i can't access via SMH to VCRM !

All other servers says, the VCRM is not present...

I've upgraded the HPSIM server with the latest version SP4 but the problem persist...

Do you have any idea ?

Re: VCRM and update

Darrell Ryan — Tue, 25 Apr 2006 14:23:26 GMT

The exact same thing happened as happened at my site, and just sine the update to 7.50.

Re: VCRM and update

Anthony_137 — Wed, 26 Apr 2006 02:43:04 GMT

And ?
Have you got any solution ?

Re: VCRM and update

Anthony_137 — Wed, 26 Apr 2006 05:08:57 GMT

I've downgraded the PSP 7.5 to 7.4.
The VCRM is now, OK

Re: VCRM and update

Terence Burton — Wed, 26 Apr 2006 05:21:50 GMT

Anthony,
How did you downgrade the PSP? I've also got the problem at the moment, which only appears to have happened since I upgraded to 7.50.

Any advice would be great

Re: VCRM and update

Anthony_137 — Wed, 26 Apr 2006 05:24:11 GMT

I've downloaded psp v7.4 on the web. After that, i've launch setup.exe and i make install with force downgrade for each drivers.

Re: VCRM and update

Ivan Daniel — Wed, 26 Apr 2006 08:36:23 GMT

I've had a similar problem and the solution to downgrading requires you uninstall the current the VCRM through Add/Remove Programs (reboot required) then install VCRM the following appears to work fine on a W2K3 server - VCRM 2.1.0.720 (cp005243.exe)

The problem for version for me was:
File: cp005599.exe
Name: Version Control Repository Manager Version 2.1.3.740

Re: VCRM and update

Anthony_137 — Wed, 26 Apr 2006 08:39:47 GMT

I didn't need to remove VCRM for downgrade.

Re: VCRM and update

Darrell Ryan — Wed, 26 Apr 2006 09:41:36 GMT

Has anyone had any success with VCRM and 7.50?

Re: VCRM and update

Stan Hurton — Wed, 26 Apr 2006 16:03:26 GMT

Has anyone talked to support about this?
Since I had to rip out the VCRM already, I'll do some testing with v7.50 and let you know if I'm able to sort it out.

Re: VCRM and update

Terence Burton — Thu, 27 Apr 2006 03:40:58 GMT

Guys,
I fixed my problem by uninstalling the VCRM and installing cp005243.exe, however, the repository re-populates, so for a couple of hours it didn't look like it had worked!!!

- Thanks Ivan for the tip.

For anybody who still has problems, a possible good thread is at:
http://forums1.itrc.hp.com/service/forums/bizsupport/questionanswer.do?threadId=996506