https://community.hpe.com/t5/server-management-systems/installation-of-hpsim/m-p/3779787#M19909 Hi,<BR />To monitor client servers you need to install SNMP and configure it with the proper community strings for your network. And you also need to install agents on your client servers that can send information to your SIM server. Also configure WBEM settings. Agents can be found on a PSP cd or downloaded from HP´s site. Sat, 29 Apr 2006 01:23:48 GMT Albert Austin 2006-04-29T01:23:48Z https://community.hpe.com/t5/server-management-systems/installation-of-hpsim/m-p/3779786#M19908 When I first installed HPSIM 5 SP3, I did not include support for unix systems. Now, I would like to add the ability to monitor linux and HP UX systems. How do I install this functionality now? Fri, 28 Apr 2006 13:20:12 GMT https://community.hpe.com/t5/server-management-systems/installation-of-hpsim/m-p/3779786#M19908 Anita Gillaspey 2006-04-28T13:20:12Z https://community.hpe.com/t5/server-management-systems/installation-of-hpsim/m-p/3779787#M19909 Hi,<BR />To monitor client servers you need to install SNMP and configure it with the proper community strings for your network. And you also need to install agents on your client servers that can send information to your SIM server. Also configure WBEM settings. Agents can be found on a PSP cd or downloaded from HP´s site. Sat, 29 Apr 2006 01:23:48 GMT https://community.hpe.com/t5/server-management-systems/installation-of-hpsim/m-p/3779787#M19909 Albert Austin 2006-04-29T01:23:48Z