topic Re: Discovery does not work on Clusters in Server Management - Systems Insight Manager

Discovery does not work on Clusters

Joseph Martin_1 — Fri, 12 May 2006 11:19:02 GMT

Automatic discovery assigns the wrong IP address (cluster resource ips) to the cluster nodes.

Manual discovery does not discover the cluster

There does not appear to be any way to correct the IP Address if it is dicovered incorrectly

How to fix?

Re: Discovery does not work on Clusters

Paul Adams_6 — Mon, 15 May 2006 07:34:15 GMT

I am having the same issue (SIM 5 SP4, WS03 SP1).

Re: Discovery does not work on Clusters

Mikael Rönnbäck — Wed, 17 May 2006 08:40:52 GMT

For the record I am seeing the same situation and have a case open with HP on this.

Re: Discovery does not work on Clusters

Craig McK — Wed, 17 May 2006 11:22:22 GMT

Same here, also the nodes sometimes just disappear during a failover instead of being marked unavailable

Re: Discovery does not work on Clusters

Matthew J Warrick — Wed, 17 May 2006 15:23:19 GMT

ditto, clusters not being identified properly... Win2k3SP1, SIM5.4...

Re: Discovery does not work on Clusters

Matthew J Warrick — Thu, 18 May 2006 11:33:01 GMT

Well it seems that the cluster portion of the management agents on the cluster nodes were not enabled in control panel (I didn't do the installs). Two of the clusters seem to be identified properly by SIM now but "Cluster Monitor" still isn't working... The other two clusters still aren't being ID'd properly though. It's a good thing I have about a month to get this right, because at the rate I'm going, I'll need it, lol. :p

Re: Discovery does not work on Clusters

Jeff Peil — Tue, 23 May 2006 08:55:43 GMT

For the record, same issue here. Cluster monitoring is enabled in the Control Panel.

Re: Discovery does not work on Clusters

Numy — Tue, 23 May 2006 13:25:06 GMT

Hi, I had a similiar problem back in December so I thought I would bump this thread and see if it helps at all:

http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=961138

Thanks!

Re: Discovery does not work on Clusters

Matthew J Warrick — Thu, 25 May 2006 09:17:07 GMT

Well it seems that "Cluster Monitor" randomly started working this morning... No changes were made to anything.

Now if I could only get the SA and networks lackeys to stop changing the ACLs everyday and breaking the SIM connectivity. meh.

Re: Discovery does not work on Clusters

Joseph Martin_1 — Thu, 25 May 2006 16:05:25 GMT

Well it seems that "Cluster Monitor" randomly started working this morning... No changes were made to anything.

I'd check on that, make sure that your clusternodes actually have the correct IP assigned to them, not a cluster resource IP or multiple IP addresses. We've had it work half-assed plenty of times thinking it was OK only to discover incorrect IPs being assigned to the cluster nodes.