https://community.hpe.com/t5/server-management-systems/get-firmware-version-for-100-ilo-s/m-p/3788908#M20231 I have SIM 5.0 SP4 installed and I am running Custom commands.<BR />I am running the following batch file from SIM.<BR /><BR />****(GETILOFW.BAT)<BR />C:\scripts\Cpqlocfg\cpqlocfg -s %DEVICENAME% -l C:\scripts\Cpqlocfg\logs\getFW\%DEVICENAME%log.txt -f C:\scripts\Cpqlocfg\Get_FW_Version.xml<BR />****<BR /><BR />this runs the following XML file<BR />****<BR /><RIBCL version="2.0"><BR /><LOGIN user_login="User" password="password"><BR /><RIB_INFO mode="read"><BR /><GET_FW_VERSION></GET_FW_VERSION><BR /></RIB_INFO><BR /></LOGIN><BR /></RIBCL><BR />****<BR /><BR /><BR />When I run the batch file to 1 ILO it runs fine. (No in SIM)<BR /><BR />If I run it from SIM to the same server, the custom command completes succesfully but no output is created.<BR /><BR />If I use the custom command, the command always completes successfully but only works for about 6 ILO then stops.<BR /><BR />What can I do to get the information from my 100 ilo's<BR /><BR />P.S. I had a previous problem with upgrading the ILO firmware is 5.0 (So SP) but this does not fix it.<BR /><BR />see <A href="http://forums1.itrc.hp.com/service/forums/bizsupport/questionanswer.do?threadId=960091" target="_blank">http://forums1.itrc.hp.com/service/forums/bizsupport/questionanswer.do?threadId=960091</A><BR /><BR /><BR /><BR />steven<BR /><BR /> Tue, 16 May 2006 08:08:49 GMT Steven Baillie 2006-05-16T08:08:49Z https://community.hpe.com/t5/server-management-systems/get-firmware-version-for-100-ilo-s/m-p/3788908#M20231 I have SIM 5.0 SP4 installed and I am running Custom commands.<BR />I am running the following batch file from SIM.<BR /><BR />****(GETILOFW.BAT)<BR />C:\scripts\Cpqlocfg\cpqlocfg -s %DEVICENAME% -l C:\scripts\Cpqlocfg\logs\getFW\%DEVICENAME%log.txt -f C:\scripts\Cpqlocfg\Get_FW_Version.xml<BR />****<BR /><BR />this runs the following XML file<BR />****<BR /><RIBCL version="2.0"><BR /><LOGIN user_login="User" password="password"><BR /><RIB_INFO mode="read"><BR /><GET_FW_VERSION></GET_FW_VERSION><BR /></RIB_INFO><BR /></LOGIN><BR /></RIBCL><BR />****<BR /><BR /><BR />When I run the batch file to 1 ILO it runs fine. (No in SIM)<BR /><BR />If I run it from SIM to the same server, the custom command completes succesfully but no output is created.<BR /><BR />If I use the custom command, the command always completes successfully but only works for about 6 ILO then stops.<BR /><BR />What can I do to get the information from my 100 ilo's<BR /><BR />P.S. I had a previous problem with upgrading the ILO firmware is 5.0 (So SP) but this does not fix it.<BR /><BR />see <A href="http://forums1.itrc.hp.com/service/forums/bizsupport/questionanswer.do?threadId=960091" target="_blank">http://forums1.itrc.hp.com/service/forums/bizsupport/questionanswer.do?threadId=960091</A><BR /><BR /><BR /><BR />steven<BR /><BR /> Tue, 16 May 2006 08:08:49 GMT https://community.hpe.com/t5/server-management-systems/get-firmware-version-for-100-ilo-s/m-p/3788908#M20231 Steven Baillie 2006-05-16T08:08:49Z