https://community.hpe.com/t5/server-management-systems/loading-mib-on-sim/m-p/3797283#M20539 The HP SIM MIB compiler only support SNMPv1 syntax. Wed, 31 May 2006 09:35:59 GMT David Claypool 2006-05-31T09:35:59Z https://community.hpe.com/t5/server-management-systems/loading-mib-on-sim/m-p/3797282#M20538 Hi , <BR /> When I try to register the mib obtained from vendor on SIM using command mcompile , I get the error <BR />"'Error defining OBJECT-TYPE: Expected 'MAX-ACCESS',".<BR />The same mib are loaded sucessfully on mib browser like mibble , iReasoning .<BR />The MIb which I loaded has the following lines which throws syntax error .<BR /><BR />moRowStatus OBJECT-TYPE<BR /> SYNTAX RowStatus<BR /> {<BR /> active(1),<BR /> createAndGo(4),<BR /> destroy(6)<BR /> }<BR /> MAX-ACCESS read-create<BR /> STATUS current<BR /> DESCRIPTION<BR /> "This field is used to add or delete a managed object in the table."<BR /> ::= {imEntry 3} .<BR />RowStatus is imported from SNMPv2-TC .<BR />Is there anything wrong with the syntax of mib .Can anyone provide insight on this .<BR /><BR />Regards<BR />Sudesh Acharya Wed, 31 May 2006 03:37:49 GMT https://community.hpe.com/t5/server-management-systems/loading-mib-on-sim/m-p/3797282#M20538 sudesh_5 2006-05-31T03:37:49Z https://community.hpe.com/t5/server-management-systems/loading-mib-on-sim/m-p/3797283#M20539 The HP SIM MIB compiler only support SNMPv1 syntax. Wed, 31 May 2006 09:35:59 GMT https://community.hpe.com/t5/server-management-systems/loading-mib-on-sim/m-p/3797283#M20539 David Claypool 2006-05-31T09:35:59Z https://community.hpe.com/t5/server-management-systems/loading-mib-on-sim/m-p/3797284#M20540 HI , <BR /> Thanks for the reply. <BR />Does the statement "SIM support snmp v1 syntax", mean that , there is a need for MIB compiler of SIM to be upgraded . <BR /><BR />Regards<BR />SUdesh Fri, 30 Jun 2006 08:04:25 GMT https://community.hpe.com/t5/server-management-systems/loading-mib-on-sim/m-p/3797284#M20540 sudesh_5 2006-06-30T08:04:25Z