https://community.hpe.com/t5/server-management-systems/2-server-with-the-same-uuid/m-p/3799330#M20666 I have 2 servers with the same UUID. In SIM I see one system with booth servers ip-addresses. Is it possible to change the UUID?<BR /><BR />// Daniel Fri, 02 Jun 2006 09:00:18 GMT Daniel Rosendahl 2006-06-02T09:00:18Z https://community.hpe.com/t5/server-management-systems/2-server-with-the-same-uuid/m-p/3799330#M20666 I have 2 servers with the same UUID. In SIM I see one system with booth servers ip-addresses. Is it possible to change the UUID?<BR /><BR />// Daniel Fri, 02 Jun 2006 09:00:18 GMT https://community.hpe.com/t5/server-management-systems/2-server-with-the-same-uuid/m-p/3799330#M20666 Daniel Rosendahl 2006-06-02T09:00:18Z https://community.hpe.com/t5/server-management-systems/2-server-with-the-same-uuid/m-p/3799331#M20667 I'm having this same problem right now with 6 servers combined into 3 records.<BR /><BR />At least we know the cause. In an emergency, we had to use the drive from one pool server to rebuild another that failed. We've done that 3 times now and all three pairs are in combined records.<BR /><BR />I would truly love to know if there is a way to regenerate the UUID of a server or if this is even the piece that is tying these servers together. <BR /><BR />So far, I have tried searching in all files on the server for the UUID listed in SIM and also through the Registry with no luck. I've tried deleting the records out of SIM and re-adding them using names and then trying again using only their IP's. <BR /><BR />If there is a way to correct this I would be very appreciative since some of our servers would take weeks to rebuild by hand if we can no longer use this process.<BR /><BR />Thanks <BR /><BR /> Fri, 16 Jun 2006 18:30:41 GMT https://community.hpe.com/t5/server-management-systems/2-server-with-the-same-uuid/m-p/3799331#M20667 Justin Galbraith 2006-06-16T18:30:41Z https://community.hpe.com/t5/server-management-systems/2-server-with-the-same-uuid/m-p/3799332#M20668 Hello,<BR /><BR />to change the UUID you need to change the settings in the registry. It may be the key HLM\Software\Compaq Insight Agent\hostGUID where the key hostGUID must be deleted. The Server-ID is normaly build when the agents are installed. Using images results in server eith the same id.<BR /><BR />Please also check out this forum the solution (complete registry description) was given several month ago.<BR /><BR />Regards<BR /><BR />Guido Mon, 19 Jun 2006 02:19:43 GMT https://community.hpe.com/t5/server-management-systems/2-server-with-the-same-uuid/m-p/3799332#M20668 Guido Koetter 2006-06-19T02:19:43Z https://community.hpe.com/t5/server-management-systems/2-server-with-the-same-uuid/m-p/3799333#M20669 Stopping the HP agents, deleting hostGUID and starting the HP agents resolved the problem.<BR /><BR />Thanks Guido!<BR /><BR />Best regards, Daniel Mon, 19 Jun 2006 03:04:57 GMT https://community.hpe.com/t5/server-management-systems/2-server-with-the-same-uuid/m-p/3799333#M20669 Daniel Rosendahl 2006-06-19T03:04:57Z https://community.hpe.com/t5/server-management-systems/2-server-with-the-same-uuid/m-p/3799334#M20670 You guys rock!<BR /><BR />Thanks for the help. Mon, 19 Jun 2006 11:09:49 GMT https://community.hpe.com/t5/server-management-systems/2-server-with-the-same-uuid/m-p/3799334#M20670 Justin Galbraith 2006-06-19T11:09:49Z