topic PMP liscensing Problems in Server Management - Systems Insight Manager

PMP liscensing Problems

seedomang — Mon, 05 Jun 2006 11:22:01 GMT

When i try to Install a liscense on my proliant ML530 G1 I get the following error

ProLiant ML530 10..x.x.x Server does not have a serial number

This server has a serial number

Thanks

KP

Re: PMP liscensing Problems

Aravindh Rajaram — Mon, 05 Jun 2006 12:12:23 GMT

See if SIM has identified the serial number. You can check this out in the system page of the server. If not, make sure that the agents are installed and the SNMP configurations are correct and then re-identify the server.

Re: PMP liscensing Problems

seedomang — Tue, 06 Jun 2006 16:33:30 GMT

I have re identified the server and the SNMP settings are correct. It still shows the serial number error.

Re: PMP liscensing Problems

Rob Buxton — Tue, 06 Jun 2006 17:50:23 GMT

If the server has had a System Board replaced there may not be a Serial No. in the BIOS.
You'll need to reboot the server and have a look in the BIOS settings directly and possibly enter the serial number that should be recorded on the outside of the box somewhere.

The ML530 seems quite old, is this server supported by PMP?