https://community.hpe.com/t5/server-management-systems/disk-thresholds/m-p/3813677#M21157 I am attempting to configure Disk Thresholds on my servers (Proliant ML370s). They are sending alerts when they lose power redundancy, go down, hard disk errors, etc. I am using my own customer SNMP String (ex: SN1MP set to Read/Write). When I try to use SIM to configure the the Disk Threshold, SIM comes back saying: "Could not set the disk threshold, the agent did not accept the request". My first server is running Windows 2000 Server SP4, latest PSP and Management Agents. Any ideas? Tue, 27 Jun 2006 16:25:21 GMT EricL_1 2006-06-27T16:25:21Z https://community.hpe.com/t5/server-management-systems/disk-thresholds/m-p/3813677#M21157 I am attempting to configure Disk Thresholds on my servers (Proliant ML370s). They are sending alerts when they lose power redundancy, go down, hard disk errors, etc. I am using my own customer SNMP String (ex: SN1MP set to Read/Write). When I try to use SIM to configure the the Disk Threshold, SIM comes back saying: "Could not set the disk threshold, the agent did not accept the request". My first server is running Windows 2000 Server SP4, latest PSP and Management Agents. Any ideas? Tue, 27 Jun 2006 16:25:21 GMT https://community.hpe.com/t5/server-management-systems/disk-thresholds/m-p/3813677#M21157 EricL_1 2006-06-27T16:25:21Z https://community.hpe.com/t5/server-management-systems/disk-thresholds/m-p/3813678#M21158 Check that the server has SNMP Sets Enabled.<BR />From the servers SMH, go to the Settings Tab -&gt; SNMP and Agent Settings, check the Management Agents section and that SNMP Sets are enabled.<BR /><BR />This item can be configured in the cp00xxxx.exe file for the SMH so that this setting is deployed when the agent is deployed. Tue, 27 Jun 2006 18:34:44 GMT https://community.hpe.com/t5/server-management-systems/disk-thresholds/m-p/3813678#M21158 Rob Buxton 2006-06-27T18:34:44Z