topic Re: Insight Manager Configuration in Server Management - Systems Insight Manager

Insight Manager Configuration

Fario Marismari — Mon, 03 Jul 2006 09:15:30 GMT

Within IM Ver 5 with SP4, Options, Cluster Monitor... following the help file instructions "Configuring Node Resource Settings" I do not have any servers listed that have clustering software installed.

I do not have ANY option to select a Cluster Server environment. Can anyone advise please? I have a couple of simple two node clusters fully configured and available witin in IM Ver 5 with SP4 - Windows.

Re: Insight Manager Configuration

fred Passeron — Fri, 21 Jul 2006 03:17:21 GMT

Hi

Have you setup your insight agents properly ? On each node of your MSCS Cluster, go under settings / control panel / hp management agents. There check that the clustering Information is part of the active services. If not, add this to the active services. Restart the agents.
In HP SIM run an identification task on each node of the cluster. Then the Cluster itsef should appear and you will be able to use the cluster monitor.

Regards

frederic

Re: Insight Manager Configuration

sterls27 — Fri, 21 Jul 2006 10:00:47 GMT

You could also do a manual discovery with the IP address of your cluster.