https://community.hpe.com/t5/server-management-systems/hpsim-and-commandview/m-p/3833384#M21795 Hmmm sent before finishing - too many distractions.<BR />I've since pulled CV-EVA and SMI-S out of the HPSIM server.<BR />Mostly things are working again except for VCA.<BR />The sw icons are still showing they're not configured.<BR />Running a S/W polling task does nothing.<BR />A couple of odd things, we have a couple of NT4 Servers running the old agents - they're fine!<BR /><BR />Also a newly built server, connected to the VCRM okay and now looks fine from the VCA.<BR /><BR />If I browse to the VCA, it hangs, unless I chose the log tab, which works. So the issue does seem to be in the communication back to the VCRM.<BR />I cannot replicate settings, that fails. If it was a credentials issue I would expect to see the failure and then an option to re-add. So, again it seems to be passing through that but getting hung in the VCRM itself. <BR /><BR />Anyone seen anything like this before.<BR /><BR />Or, has anyone got CV-EVA 5 and HPSIM 5 working on the same server? - any issues?<BR /> Sun, 30 Jul 2006 21:56:26 GMT Rob Buxton 2006-07-30T21:56:26Z https://community.hpe.com/t5/server-management-systems/hpsim-and-commandview/m-p/3833383#M21794 Hi All,<BR />Are there any known issues running CommandView and HPSIM on the same server?<BR />HPSIM 5.0 SP5, CV EVA 5.0.2 plus SMI-S. EVA8000 running 5.020.<BR />Reason I ask is that I cannot get the CV EVA page to load after installation, I just get Page not found errors.<BR /><BR />In addition this morning all of my VCA's are now reporting that they're not configured.<BR />If I try accessing them via the Homepage link or directly they just timeout and finnaly all of my SMH's give the "A timeout error occurred" message when I access them although they do go on to list all of the SMH panels.<BR /><BR />So is anyone running Sun, 30 Jul 2006 15:42:55 GMT https://community.hpe.com/t5/server-management-systems/hpsim-and-commandview/m-p/3833383#M21794 Rob Buxton 2006-07-30T15:42:55Z https://community.hpe.com/t5/server-management-systems/hpsim-and-commandview/m-p/3833384#M21795 Hmmm sent before finishing - too many distractions.<BR />I've since pulled CV-EVA and SMI-S out of the HPSIM server.<BR />Mostly things are working again except for VCA.<BR />The sw icons are still showing they're not configured.<BR />Running a S/W polling task does nothing.<BR />A couple of odd things, we have a couple of NT4 Servers running the old agents - they're fine!<BR /><BR />Also a newly built server, connected to the VCRM okay and now looks fine from the VCA.<BR /><BR />If I browse to the VCA, it hangs, unless I chose the log tab, which works. So the issue does seem to be in the communication back to the VCRM.<BR />I cannot replicate settings, that fails. If it was a credentials issue I would expect to see the failure and then an option to re-add. So, again it seems to be passing through that but getting hung in the VCRM itself. <BR /><BR />Anyone seen anything like this before.<BR /><BR />Or, has anyone got CV-EVA 5 and HPSIM 5 working on the same server? - any issues?<BR /> Sun, 30 Jul 2006 21:56:26 GMT https://community.hpe.com/t5/server-management-systems/hpsim-and-commandview/m-p/3833384#M21795 Rob Buxton 2006-07-30T21:56:26Z