topic Re: Monitoring Services in HPSIM in Server Management - Systems Insight Manager

Monitoring Services in HPSIM

Michael Wyant — Tue, 29 Aug 2006 08:31:56 GMT

Is it possible to monitor services (i.e. IIS) in HPSIM so that the customer can be notified if it crashes?

Re: Monitoring Services in HPSIM

sandeep_raman — Tue, 29 Aug 2006 08:37:04 GMT

Afaik its not possible.
SIM is a Management tool to monitor hardware devices only.

SRH

Re: Monitoring Services in HPSIM

Steve Kadish — Wed, 30 Aug 2006 09:06:56 GMT

Hi Michael,

You can monitor processes (not exactly the same as services but there's overlap) for status change, using the "Process Monitor" tab in HP Management Agents control panel.

Also, you can "Enable the Application Exception Trap" on the "SNMP Settings" tab, which will generate a trap if a process has an exception error.

Do both of those, and you should be pretty well informed.

- Steve

Re: Monitoring Services in HPSIM

Martin Smoral — Wed, 30 Aug 2006 09:10:28 GMT

You can monitor certain Processess with the PSP installed which will report to SIM. Go to the CP> Add/Rem Programs > Management Agents > Process Monitor Tab and check it out. Here is a Description from the help file.

Process Monitoring

This tab allows you to enable process monitoring. This tab is not shown during the install process.

Note that all processes running on a system or entered by the user are shown in the list box and can be monitored. However, monitoring SNMP or HP Management Agents processes is not effective. If the HP Management Agents processes are not running monitoring is not being performed. If SNMP is not running traps cannot be generated.

Re: Monitoring Services in HPSIM

Anky — Fri, 13 Feb 2009 09:18:17 GMT

Thanks for this information. we have decided to go with this option. we have 1500 systems where processes should be monitored. is there any way i can configure this remotely to all the system. Any automation possible?

Re: Monitoring Services in HPSIM

Steve Kadish — Fri, 13 Feb 2009 14:53:18 GMT

Hi,

I don't believe that there is a way to do this on more than one server. You might want to look for another option.

Good luck,
- Steve