topic Re: Performance Management Pack in Server Management - Systems Insight Manager

Performance Management Pack

Matts Sehlberg — Mon, 04 Sep 2006 09:25:39 GMT

I have install Performance Management Pack on Server A. I get a blue ? how says "PERFstatus: Unknown. Click for details". I click on the blue ? and then I get a new page whit name Unknown Performance Status. I click on the Admin button.I get a new page Monitoring Administration.
On this page I can see my Server A and under Monitoring it say Started and Alert and Log are checked. Log days is 30days Sample Rate 120sec Samples is 5.

I have install Performance Management Pack on Server B and C on this server I get a PERFstatus: Normal whit green icon.

What to do?

Re: Performance Management Pack

sandeep_raman — Mon, 04 Sep 2006 09:43:16 GMT

Hello Matts,

Perhaps its a license issue.
Or
http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=714188
http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=948835

SRH

Re: Performance Management Pack

Rob Buxton — Mon, 04 Sep 2006 15:07:52 GMT

Try setting monitoring, Alert, Log off and leaving it for a bit and then re-enable what you want and see if that makes a difference.

What version of PMP are you running? I'm having a couple of problems with 4.1.1.
Sometimes restarting the PMP service fixes things.

Re: Performance Management Pack

pkrai — Tue, 05 Sep 2006 01:18:08 GMT

If that system has been licensed & configured for monitoring, PMP takes some time initially (depend upon the sampling rate & number of samples required), for online analysis. And during that period PF icon shows Unknown '?' state.

But even after waiting for several minutes, if system's status doesn't change in PF icon, that indicates PMP is unable to collect enough samples from the system (may be due to some problem in subsystems). You can verify this from a log file 'pmplog.txt' (have to create an empty file in PMP installation path or it is not there already).

Thanks.

Re: Performance Management Pack

Matts Sehlberg — Tue, 05 Sep 2006 14:35:51 GMT

The version I run is SIM 5.0 SP5

and this plug-ins

HP Performance Management Pack 4.1
HP Server Migration Pack 2.0.2
HP Virtual Machine Management Pack 2.0.2
HP BladeSystem Integrated Manager 2.1

/Matts

Re: Performance Management Pack

Matts Sehlberg — Tue, 05 Sep 2006 15:17:44 GMT

Information from PMPLOG.TXT

06-09-05 22:11:04: server_A - State changed from 0 to 5
2006-09-05 22:11:04: server_A sample failed
2006-09-05 22:11:14: server_A - Entering DoWork
2006-09-05 22:11:14: server_A - State changed from 5 to 0
2006-09-05 22:11:14: server_A OK.
2006-09-05 22:13:04: server_A - State changed from 0 to 5
2006-09-05 22:13:04: server_A sample failed
2006-09-05 22:13:14: server_A - Entering DoWork

/Matts

2006-09-05 22:13:14: server_A - State changed from 5 to 0
2006-09-05 22:13:14: server_A OK.

Re: Performance Management Pack

Rob Buxton — Tue, 05 Sep 2006 15:19:57 GMT

You could try updating to PMP 4.1.1
It certainly solved some problems, but not all.

Personally I'd like to drop back to 4.0, but I'm not sure if that would work under HPSIM 5.0 SP5.

Re: Performance Management Pack

pkrai — Wed, 06 Sep 2006 03:11:38 GMT

Hi Matt,

I think, there were some problems with 4.1 so, better to try 4.1.1. The snapshot of the logfile points to the problem, where PMP is not able to get some informations from Management Agents on the target system. You should try to retart agents or if the problem still persist, restart the target system.

Thanks.