topic Re: Disk thresholds traps in Server Management - Systems Insight Manager

Disk thresholds traps

Jerker Svensson — Thu, 07 Sep 2006 09:39:26 GMT

Disk thresholds traps
Hi,

would like to sent traps about disk thresholds both to our Insight Manager server and our Unicenter.
I'm getting the warnings to my Insight server but can't find the traps in our Unicenter server... Does anyone have a clue about how to make it work??

I'm getting traps about failed hardware and so on to the Unicenter server but not the ones about disk space...

Regards,
Jerker

Re: Disk thresholds traps

Kantcho Manahov — Thu, 07 Sep 2006 10:10:47 GMT

Hello ,

If you get the traps in Insight manager. It means the threshold are configured on the server. Is the SNMP is configured to send traps to CA Unicenter. It is possible to see the warnings in Unicenter , because it polls the status every 5 minutes for performance history.
Also verify the Event Manager policy in unicenter how do you dela with these traps.

I hope this help.

Re: Disk thresholds traps

Jerker Svensson — Fri, 08 Sep 2006 01:02:45 GMT

Hi,

snmp on the serevr is configured to send traps to both the Insight and Unicenter server.
Warnings about disk failiures and so on is showing up in unicenter but not the ones about disk thresholds...

About the Event Manager policy in Unicenter, do anyone have the name for the specific trap that the server sends to Insight and Unicenter?

//Jerker

Re: Disk thresholds traps

Kantcho Manahov — Tue, 12 Sep 2006 09:12:12 GMT

Hello ,
In HP SIM the events are Proliant Threshold Events. The MIB name should compaq-str.mib.
OID are .1.3.6.1.4.1.232.1.3.1.0.10006 and 10005.
In Unicenter that should be configured in Event Manager if I remember well otherwise it wont show them. I f you have loaded already COMPAQ MIB or the integration package the alarm detail should be there.