topic Re: Duplicate UUID in Server Management - Systems Insight Manager

Duplicate UUID

Chan Kuo Hau — Wed, 27 Sep 2006 03:49:23 GMT

Somehow, there are 2 machines having the exact UUID. As such, during discovery, only 1 machine is discovered. How to I change the UUID?

Re: Duplicate UUID

Albert Austin — Wed, 27 Sep 2006 04:43:59 GMT

Hi,

Check this link out,

http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=1031966

Re: Duplicate UUID

Albert Austin — Wed, 27 Sep 2006 04:44:06 GMT

Hi,

Check this link out,

http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=1031966

Albert

Re: Duplicate UUID

sandeep_raman — Wed, 27 Sep 2006 04:44:09 GMT

Hello Chan,

See if uuidgen command helps.

SRH

Re: Duplicate UUID

Albert Austin — Wed, 27 Sep 2006 04:49:30 GMT

sorry for the double post.

Re: Duplicate UUID

ramesh_naik_ — Wed, 27 Sep 2006 05:23:54 GMT

Hi Chan,

HP management software uses a Unique Unit Identifier (UUID) based on the product serial number to identify the server or server blade.

HP Systems Insight Manager (HPSIM) Version 4.1 (or later) and HP Insight Management Agents Version 7.10 (or later) can identify these new servers by both serial number and product ID number.

The ROM Based Setup Utility (RBSU) for ProLiant servers also allows users to update the serial number and product ID number information manually in the event of a system board replacement.

Hope this helps!!!

Regards,
rmn