https://community.hpe.com/t5/server-management-systems/sim-access-problem/m-p/3880242#M23328 hi every body<BR /><BR />in our network we have SIM installed on HP-UX platfrom (rp3440) as a package in cluster (consists of 2 nodes)<BR /><BR />sudenlly ,the two severs has a memory utilization 98% so i halt the pkg , halt cluster and restart the two servers . then strat the cluster and pkg.<BR /><BR />when sim run as pkg on first node (i can login to sim web interface but all custome command and network elements manget by SIM does not appear )<BR /><BR />so i halt the pkg then start it on the 2 nd node then i have the previous situation <BR /><BR />so i halt the pkg again and run it on the 1st node (i can not access SIM web interface , it gives me failed authentication)<BR /><BR />after that i run the pkg again on the 2nd node (i received the same error)<BR /><BR />so the current situation the two nodes can run the pkg of SIM but can not access the SIM web interface as failed authenthication received althought i use the right user name and password <BR /><BR />does any one have an explanation for that scenarion ? what is your recommendation?<BR /><BR />best regards<BR />omy Sat, 14 Oct 2006 10:15:09 GMT omy 2006-10-14T10:15:09Z https://community.hpe.com/t5/server-management-systems/sim-access-problem/m-p/3880242#M23328 hi every body<BR /><BR />in our network we have SIM installed on HP-UX platfrom (rp3440) as a package in cluster (consists of 2 nodes)<BR /><BR />sudenlly ,the two severs has a memory utilization 98% so i halt the pkg , halt cluster and restart the two servers . then strat the cluster and pkg.<BR /><BR />when sim run as pkg on first node (i can login to sim web interface but all custome command and network elements manget by SIM does not appear )<BR /><BR />so i halt the pkg then start it on the 2 nd node then i have the previous situation <BR /><BR />so i halt the pkg again and run it on the 1st node (i can not access SIM web interface , it gives me failed authentication)<BR /><BR />after that i run the pkg again on the 2nd node (i received the same error)<BR /><BR />so the current situation the two nodes can run the pkg of SIM but can not access the SIM web interface as failed authenthication received althought i use the right user name and password <BR /><BR />does any one have an explanation for that scenarion ? what is your recommendation?<BR /><BR />best regards<BR />omy Sat, 14 Oct 2006 10:15:09 GMT https://community.hpe.com/t5/server-management-systems/sim-access-problem/m-p/3880242#M23328 omy 2006-10-14T10:15:09Z https://community.hpe.com/t5/server-management-systems/sim-access-problem/m-p/3880243#M23329 hi every body <BR /><BR />now i can access the SIM application throught GUI interface , but it is empty , has no network elements nor custom commands and i have received the following error <BR />in /etc/cmcluster/SIMNNM/simnnm.cntl.log<BR /><BR />=== Start PG db<BR />LOG: could not bind IPv4 socket: Address already in use<BR />HINT: Is another postmaster already running on port 50006? If not, wait a few seconds <BR />and retry.<BR />FATAL: could not create TCP/IP listen socket<BR /><BR />does any one face the same case , please send to me your recommendations .<BR />Note : SIM start script is attached <BR /><BR />best regards<BR />omy Sun, 15 Oct 2006 07:09:44 GMT https://community.hpe.com/t5/server-management-systems/sim-access-problem/m-p/3880243#M23329 omy 2006-10-15T07:09:44Z