topic Disk thresholds not saving in Server Management - Systems Insight Manager

Disk thresholds not saving

Stefan Dorn — Thu, 26 Oct 2006 09:39:08 GMT

When I set a disk threshold, either from SIM or from the server's system management homepage, after I click save or run the task, the settings are not stored. What could be causing this?

Re: Disk thresholds not saving

Stefan Dorn — Thu, 26 Oct 2006 09:41:46 GMT

I should have pointed out this is happening on *any* server I try to set. I'm running the latest proliant support pack, and SIM 5.0 with the latest service pack.

Re: Disk thresholds not saving

Daniel Leblanc — Thu, 26 Oct 2006 11:45:02 GMT

is everything like this set?:

1 All you re server SNMP setting are set for TRAPS>Communite name(correc name),TRAPS>Communite name>traps destination> 1-server Insight & 2-127.0.0.1
#2 All you re server snmp setting are set for SECURITE> Accepted community name>Communite name(correc name),All you re server snmp setting are set for SECURITE> Accepted community name>Communite name> Accepted packet from these host>1-server Insight & 2-127.0.0.1.

3# in youre Home page manegement>Setting>Securite
A_IP Binding-Nothing
B_IP Restricted Login-Nothing
C_Local Server Certificate-Nothing
D_Local/Anonymous Access-Nothing
E_Trust Mode>Secure Trust Modes:Trust by Certificate
F_Trusted Management Servers>Importe you Insight server certificate
G_User Groups-Nothing

Re: Disk thresholds not saving

Stefan Dorn — Thu, 26 Oct 2006 15:03:11 GMT

Thanks for the ideas. Turns out that my SNMP settings got deleted somehow, so there was no write string set.

Re: Disk thresholds not saving

Daniel Leblanc — Fri, 27 Oct 2006 09:21:23 GMT

Ok no trouble, don't forget to apply you re point and close the message.

HAve a nice day!

Dan