https://community.hpe.com/t5/server-management-systems/mib-s/m-p/3888810#M23627 I want to pump some SNMP traps into a 3rd party tool for an ML350 and DL360. I have found the MIB's on the CD's, but they don't seem to have any for the power supplies (main or redundant). Nor can I find an MIB for an embedded 5i SCSCI ctrl. Both servers are running MS 2003 - Thanks in advance Mon, 30 Oct 2006 05:03:50 GMT R S 123 2006-10-30T05:03:50Z https://community.hpe.com/t5/server-management-systems/mib-s/m-p/3888810#M23627 I want to pump some SNMP traps into a 3rd party tool for an ML350 and DL360. I have found the MIB's on the CD's, but they don't seem to have any for the power supplies (main or redundant). Nor can I find an MIB for an embedded 5i SCSCI ctrl. Both servers are running MS 2003 - Thanks in advance Mon, 30 Oct 2006 05:03:50 GMT https://community.hpe.com/t5/server-management-systems/mib-s/m-p/3888810#M23627 R S 123 2006-10-30T05:03:50Z https://community.hpe.com/t5/server-management-systems/mib-s/m-p/3888811#M23628 Hi<BR /><BR />Infos on Power supplies are provided by the following mib : CPQHLTH.MIB. It reports fan, PSU, and temperature failures. <BR />Regarding the 5i ctrl : you will need the CPQIDA.MIB CPQSCSI.MIB and CPQSTSYS.MIB.<BR /><BR />Regards<BR /><BR />Frederic Passeron Mon, 30 Oct 2006 10:07:07 GMT https://community.hpe.com/t5/server-management-systems/mib-s/m-p/3888811#M23628 fred Passeron 2006-10-30T10:07:07Z https://community.hpe.com/t5/server-management-systems/mib-s/m-p/3888812#M23629 Thanks <BR />I've tried quite a few, but the SNMP comes up with an error each time - not recognised. The MIB doesn't seem to be too generous with names such as 'redundant power supply' to act as a clue, and there are a lot of possibles in there. I know I am using the correct syntax as I can get the RAID to work by using 1.3.6.1.4.1.232.3.1.3.0 Tue, 31 Oct 2006 05:42:53 GMT https://community.hpe.com/t5/server-management-systems/mib-s/m-p/3888812#M23629 R S 123 2006-10-31T05:42:53Z