topic Re: MIB registered but traps not listed in Server Management - Systems Insight Manager

MIB registered but traps not listed

Jonathan Daniels — Tue, 31 Oct 2006 11:24:08 GMT

Hi all,

We have a MIB for our software and have compiled it (using "mcompile my-mib.mib") and registered the resulting CFG file (using "mxmib -a my-mib.cfg"). This results in the mib being listed in both "mxmib -l" and the Web interface (Options -> Events -> SNMP Trap Settings) but none of the traps it contains are listed (again either inthe web interface or in "mxmib -t my-mib.mib"). It is a SNMP v2 compliant MIB but I was under the impression the "mcompile" converts to SNMP v1.

Anyone have any pointers - they would be much appreciated :)

Thanks,
Jon

Re: MIB registered but traps not listed

T. Vander Auwera — Mon, 06 Nov 2006 02:29:44 GMT

There is a document in the HPSIM information library named "Compiling and customizing SNMP MIBs with HP Systems Insight Manager"
- www.hp.com/go/hpsim
- Information Library
- How to use section.

Did you already checked it?

Re: MIB registered but traps not listed

Kenneth Wernicke — Wed, 06 Dec 2006 04:52:52 GMT

I have the same problem here, I added the mibs for the HP Procurve switches. I didn't receive any error on mcompile and mxmib, but when I look under SNMP Trap Settings and I select the MIB, the other information is not available (empty).

Re: MIB registered but traps not listed

DDR_1 — Fri, 09 Mar 2007 05:20:51 GMT

I have the same issue with Brocade mibs. Has anyone got to the bottom of this?

thanks

Re: MIB registered but traps not listed

alexbaier — Tue, 13 Mar 2007 05:02:24 GMT

Hi,

I have the same problem. We have our own Private Enterprise Number from IANA. The mib-file that I've created can be compiled and registered with mcompile and mxmib without any errors. But none of the traps is listed in "SNMP Trap Settings".

Any help is very appreciated.

Re: MIB registered but traps not listed

Terry Taylor_4 — Fri, 26 Oct 2007 09:01:27 GMT

I have the same issue with a Blackberry Server MIB... anyone resolve this?

Re: MIB registered but traps not listed

kenny chia — Fri, 02 Nov 2007 02:21:33 GMT

Hi
I have the same problem for HPSIM version 5 update 1 for Linux

I successfully registered the mib for the IP console viewer switch

[13:00:03 root@hpsim /opt/mx/mibs]# mxmib -a CPQKVM.cfg

IMPORTING CFG CPQKVM.cfg
COMMAND COMPLETED SUCCESSFULLY

But this entry does not show up in the web interface