topic Re: Monitoring Netserver with NT4 in Server Management - Systems Insight Manager

Monitoring Netserver with NT4

Jameson_2 — Mon, 12 Apr 2004 03:50:45 GMT

Can hpSIM monitor Netserver with NT4? If its possible, what would be the requirement?

From the website, I do not see any client version for NT4 so does that mean hpSIM can't monitor Netserver with NT4 operating system?

Please advise. Thanks!

Re: Monitoring Netserver with NT4

David Claypool — Mon, 12 Apr 2004 10:05:00 GMT

Please see the paper "guide to interoperability of hp hardware and hardware
management tools: hp Toptools 5.6 with ProLiant servers and
Insight Manager 7 with hp Netserver systems" at ftp://ftp.compaq.com/pub/supportinformation/papers/tc030304wp_rev0_us.pdf

Everything is still valid when using hpSIM with the exception of the section "compiling new HP MIBs." Those are already included with hpSIM (as well as IM7SP2 and later...).

Re: Monitoring Netserver with NT4

Stefan Kreft — Fri, 29 Jul 2005 02:13:32 GMT

Hi, I'm looking also for the whitepaper described in this article but the link is dead :-( Had anybody this article in archive?
Tanks

Re: Monitoring Netserver with NT4

David Claypool — Fri, 29 Jul 2005 11:09:19 GMT

Here's an archive link: http://whitepapers.zdnet.com/abstract.aspx?promo=50002&docid=42491