https://community.hpe.com/t5/server-management-systems/mxnodesecurity/m-p/3906011#M24243 Hello,<BR />I've defined some custom commands in HP SIM that must be run as user hpsim, hpsim2 or root...<BR />I've modified the xml definition file for each of them (<EXECUTE-AS-USER> field)...<BR />Now my question; these commands will be run via SSH, so for each user, I've an SSH access (running ok), and I've seen that there is the "./mxnodesecurity" that should help me to do what I want... <BR />So, what I've done on the CMS:<BR /><BR />I've typed :<BR />./mxnodesecurity -a -p ssh -c hpsim:apasswd -n mymachine<BR />./mxnodesecurity -a -p ssh -c hpsim2:apasswd -n mymachine<BR />./mxnodesecurity -a -p ssh -c root:apasswd -n mymachine<BR /><BR />But seems that you can only use this to authorize one user because when I type:<BR />./mxnodesecurity -l -p ssh -n mymachine<BR /><BR />I see:<BR /><BR />TARGET NODE PROTOCOL NAME PASSWORD<BR />mymachine ssh root ********<BR /><BR />So I'm getting a 'SShAuthentication failure' for the commands which should be run as hpsim or hpsim2<BR />I suppose there's an easy way of doing this ?<BR /></EXECUTE-AS-USER> Thu, 30 Nov 2006 09:12:20 GMT BLETARD Philippe 2006-11-30T09:12:20Z https://community.hpe.com/t5/server-management-systems/mxnodesecurity/m-p/3906011#M24243 Hello,<BR />I've defined some custom commands in HP SIM that must be run as user hpsim, hpsim2 or root...<BR />I've modified the xml definition file for each of them (<EXECUTE-AS-USER> field)...<BR />Now my question; these commands will be run via SSH, so for each user, I've an SSH access (running ok), and I've seen that there is the "./mxnodesecurity" that should help me to do what I want... <BR />So, what I've done on the CMS:<BR /><BR />I've typed :<BR />./mxnodesecurity -a -p ssh -c hpsim:apasswd -n mymachine<BR />./mxnodesecurity -a -p ssh -c hpsim2:apasswd -n mymachine<BR />./mxnodesecurity -a -p ssh -c root:apasswd -n mymachine<BR /><BR />But seems that you can only use this to authorize one user because when I type:<BR />./mxnodesecurity -l -p ssh -n mymachine<BR /><BR />I see:<BR /><BR />TARGET NODE PROTOCOL NAME PASSWORD<BR />mymachine ssh root ********<BR /><BR />So I'm getting a 'SShAuthentication failure' for the commands which should be run as hpsim or hpsim2<BR />I suppose there's an easy way of doing this ?<BR /></EXECUTE-AS-USER> Thu, 30 Nov 2006 09:12:20 GMT https://community.hpe.com/t5/server-management-systems/mxnodesecurity/m-p/3906011#M24243 BLETARD Philippe 2006-11-30T09:12:20Z