topic Re: Blank systems homepage in Server Management - Systems Insight Manager

Blank systems homepage

Peter Stringer — Fri, 05 Jan 2007 06:53:22 GMT

On a few of my servers I get a near blank homepage. On the left hand pane all I have is version control agent.

Just wondering where all the other info is on hardware?

Re: Blank systems homepage

Szabolcs Petho_1 — Fri, 05 Jan 2007 07:24:29 GMT

If all HP agents are running on your problematic servers I would check is the Windows SNMP service settings and HP SMH SNMP settings match and localhost is allowed for Windows SNMP.

Re: Blank systems homepage

Peter Stringer — Fri, 05 Jan 2007 08:43:58 GMT

"If all HP agents are running on your problematic servers I would check is the Windows SNMP service settings and HP SMH SNMP settings match and localhost is allowed for Windows SNMP."

HP agents are running, SNMP is running and set up perfectly on server. Not sure about your last point though about HP SMH SNMP settings? is this a setting on HP SIM, and where is setting for loacal host ?

Re: Blank systems homepage

SFell — Fri, 05 Jan 2007 09:07:00 GMT

I've had some System Management Homepages look like that after installing new agents and clear up after reboot.
You can try restarting the agents without reboot under "Settings" tab, "SNMP & Agent Settings" link, & "Restart Agents" button.

Re: Blank systems homepage

Szabolcs Petho_1 — Fri, 05 Jan 2007 09:14:13 GMT

Sorry, I was wrong. These should always match since you set the same SNMP settings.

The second question:

On HP SMH:
settings -> SNMP Webagent ->SNMP & Agent Settings

Use
Accept any SNMP packets from any host
or
Accept SNMP packets from these hosts and this should include localhost.

Re: Blank systems homepage

Peter Stringer — Fri, 05 Jan 2007 09:16:29 GMT

yes that is set up local host being 127.0.0.1

All seems fine yet and I have just restarted all services ( HP Agents ) and still nothing?

Regards