https://community.hpe.com/t5/server-management-systems/dl380-g3-raid-5-problems/m-p/3925084#M24800 Smart Array 5i in the system.<BR /><BR />The system has a raid 5 configuratin. <BR />The Array consisted of 3 - 36gb 10k Rpm drives.<BR /><BR />One of the drives failed. Due to a little age on the server we had some difficulty getting a 36gb as a replacement so we put a 72gb in it's place.<BR /><BR />The drive is being recognized, and seen properly and with the 72gb size.<BR /><BR />It's never been an issue till now to put in a larger drive than what was in the system, and have it rebuild the array.<BR /><BR />Problem: The system is not rebuilding the array as it should with the larger drive in place.<BR />Any suggestions? Is this a known issue? Thu, 11 Jan 2007 19:50:25 GMT kis.charles.russell 2007-01-11T19:50:25Z https://community.hpe.com/t5/server-management-systems/dl380-g3-raid-5-problems/m-p/3925084#M24800 Smart Array 5i in the system.<BR /><BR />The system has a raid 5 configuratin. <BR />The Array consisted of 3 - 36gb 10k Rpm drives.<BR /><BR />One of the drives failed. Due to a little age on the server we had some difficulty getting a 36gb as a replacement so we put a 72gb in it's place.<BR /><BR />The drive is being recognized, and seen properly and with the 72gb size.<BR /><BR />It's never been an issue till now to put in a larger drive than what was in the system, and have it rebuild the array.<BR /><BR />Problem: The system is not rebuilding the array as it should with the larger drive in place.<BR />Any suggestions? Is this a known issue? Thu, 11 Jan 2007 19:50:25 GMT https://community.hpe.com/t5/server-management-systems/dl380-g3-raid-5-problems/m-p/3925084#M24800 kis.charles.russell 2007-01-11T19:50:25Z