Server Management - Systems Insight ManagerのトピックRe: Unable to Discover any systems - Sim 5 SP5

Unable to Discover any systems - Sim 5 SP5

Steven_90 — Wed, 17 Jan 2007 09:23:16 GMT

H E L P ! ! ! P L E A S E ! !

I'm unable to discover any systems either by Automatic or Manual discovery.

WBEM settings are ok, SNMP is setup ok. I've tried using Discovery filters and i've also tried it with the filter off completely.

I am attempting to discover HP servers across several subnets (routing is ok).

If I check the Audit logs it shows the following, but it does not add the system to the all systems list: -

1267: 2007-01-17 14:05:11 GMT,CONFIG,SUCCESS,RUN,DISCOVERY,Ping:172.nnn.nnn.nnn
GMT,CONFIG,SUCCESS,RUN,DISCOVERY,Ping:servername

Re: Unable to Discover any systems - Sim 5 SP5

NJK-Work — Wed, 17 Jan 2007 12:05:34 GMT

Can you manually add devices?

Re: Unable to Discover any systems - Sim 5 SP5

NJK-Work — Wed, 17 Jan 2007 12:06:03 GMT

Oops - sorry, did not fully read your post.

Re: Unable to Discover any systems - Sim 5 SP5

jesper lund — Wed, 17 Jan 2007 12:48:55 GMT

Try this:
Stop the HP SIM service
From a DOS box, run mxconfigrepo -f
Start HP SIM service

Then try the discovery again.

Re: Unable to Discover any systems - Sim 5 SP5

Steven_90 — Thu, 01 Feb 2007 09:11:01 GMT

Hi

I've now tried to MXConfigRepo -f but it's not fixed the problem.

We have now re-installed HP Sim 5.1 and SIM did start to discover devices and add them to the systems list but now it's stopped again.

Re: Unable to Discover any systems - Sim 5 SP5

Rob Buxton — Fri, 02 Feb 2007 19:52:08 GMT

Check the discovery filter settings, if they're enabled it may be that it has not recognised the device.
Disable them to start with and see if any devices are displayed.

Re: Unable to Discover any systems - Sim 5 SP5

Steven_90 — Mon, 05 Feb 2007 05:56:10 GMT

Hi

Thanks for the info. I'm not currently using the Discovery filters so that it should find everything.

I've been investigating further, if I run mxnode -lt, all the systems that i've tried to discover are showing in the list.

They do not show in the All Systems List.

Any ideas?

Re: Unable to Discover any systems - Sim 5 SP5

Stefan måhl — Thu, 03 May 2007 09:14:27 GMT

Hi Steven
Sorry to say but...
I have the same problem as you.
The server won't show up in "All Systems" but it is listed when I run the command
mxnode.exe -lt.

Operating system: Windows 2003
Version: Systems Insight Manager 5.0 with SP4 - Windows
Build version: C.05.00.01.01

Have you find a workaround ?

Regards /Stefan

Re: Unable to Discover any systems - Sim 5 SP5

Raymond Yeung_2 — Mon, 18 Jun 2007 03:07:28 GMT

I also have same symptom... Pls kindly advise what should i do?

Thanks
Raymond

Re: Unable to Discover any systems - Sim 5 SP5

Ryan Birk — Mon, 15 Oct 2007 13:08:04 GMT

I had issues just now with this. It was a database rights issue.